##############################################################

edge_control.name=Arduino Edge Control

edge_control.build.core=arduino

edge_control.build.crossprefix=arm-none-eabi-

edge_control.build.compiler_path={runtime.tools.arm-none-eabi-gcc-7-2017q4.path}/bin/

edge_control.build.variant=EDGE_CONTROL

edge_control.build.mcu=cortex-m4

edge_control.build.extra_flags=

edge_control.build.architecture=cortex-m4

edge_control.build.fpu=-mfpu=fpv4-sp-d16

edge_control.build.float-abi=-mfloat-abi=softfp

edge_control.build.board=EDGE_CONTROL

edge_control.build.ldscript=linker_script.ld

edge_control.compiler.mbed.arch.define=-DARDUINO_ARCH_NRF52840

edge_control.compiler.mbed.defines={build.variant.path}/defines.txt

edge_control.compiler.mbed.ldflags={build.variant.path}/ldflags.txt

edge_control.compiler.mbed.cflags={build.variant.path}/cflags.txt

edge_control.compiler.mbed.cxxflags={build.variant.path}/cxxflags.txt

edge_control.compiler.mbed.includes={build.variant.path}/includes.txt

edge_control.compiler.mbed.extra_ldflags=-lstdc++ -lsupc++ -lm -lc -lgcc -lnosys

edge_control.compiler.mbed="{build.variant.path}/libs/libmbed.a" "{build.variant.path}/libs/libcc_310_core.a" "{build.variant.path}/libs/libcc_310_ext.a" "{build.variant.path}/libs/libcc_310_trng.a"

edge_control.vid.0=0x2341

edge_control.pid.0=0x005d

edge_control.vid.1=0x2341

edge_control.pid.1=0x805d

edge_control.upload_port.0.vid=0x2341

edge_control.upload_port.0.pid=0x005d

edge_control.upload_port.1.vid=0x2341

edge_control.upload_port.1.pid=0x805d

edge_control.upload.tool=bossac

edge_control.upload.tool.default=bossac

edge_control.upload.protocol=

edge_control.upload.transport=

edge_control.upload.use_1200bps_touch=true

edge_control.upload.wait_for_upload_port=true

edge_control.upload.native_usb=true

edge_control.upload.maximum_size=983040

edge_control.upload.maximum_data_size=262144

edge_control.bootloader.tool=openocd

edge_control.bootloader.tool.default=openocd

edge_control.bootloader.extra_action.preflash=echo INFO:removed_mass-erase

edge_control.bootloader.config=-f target/nrf52.cfg

edge_control.bootloader.programmer=-f interface/cmsis-dap.cfg

edge_control.bootloader.file=EDGE_CONTROL/bootloader.hex

edge_control.debug.server.openocd.scripts.0=interface/{programmer.protocol}.cfg

edge_control.debug.server.openocd.scripts.1={programmer.transport_script}

edge_control.debug.server.openocd.scripts.2=target/nrf52.cfg

edge_control.debug.svd_file={runtime.platform.path}/svd/nrf52840.svd

##############################################################

menu.split=Flash split

menu.target_core=Target core

menu.security=Security setting

envie_m7.name=Arduino Portenta H7

envie_m7.build.core=arduino

envie_m7.build.crossprefix=arm-none-eabi-

envie_m7.build.compiler_path={runtime.tools.arm-none-eabi-gcc-7-2017q4.path}/bin/

envie_m7.menu.target_core.cm7=Main Core

envie_m7.menu.target_core.cm4=M4 Co-processor

envie_m7.menu.split.50_50=1MB M7 + 1MB M4

envie_m7.menu.split.75_25=1.5MB M7 + 0.5MB M4

envie_m7.menu.split.100_0=2MB M7 + M4 in SDRAM

envie_m7.menu.security.none=None

envie_m7.menu.security.sien=Signature + Encryption

envie_m7.menu.target_core.cm7.build.variant=PORTENTA_H7_M7

envie_m7.menu.target_core.cm7.build.mcu=cortex-m7

envie_m7.menu.target_core.cm7.build.fpu=-mfpu=fpv5-d16

envie_m7.menu.target_core.cm7.build.architecture=cortex-m7

envie_m7.menu.target_core.cm7.compiler.mbed.arch.define=

envie_m7.menu.target_core.cm4.build.variant=GENERIC_STM32H747_M4

envie_m7.menu.target_core.cm4.build.mcu=cortex-m4

envie_m7.menu.target_core.cm4.build.fpu=-mfpu=fpv4-sp-d16

envie_m7.menu.target_core.cm4.build.architecture=cortex-m4

envie_m7.menu.target_core.cm4.compiler.mbed.arch.define=-DPORTENTA_H7_PINS

envie_m7.build.float-abi=-mfloat-abi=softfp

envie_m7.build.extra_flags=

envie_m7.menu.split.50_50.build.extra_ldflags=-DCM4_BINARY_START=0x08100000 -DCM4_BINARY_END=0x08200000

envie_m7.menu.split.75_25.build.extra_ldflags=-DCM4_BINARY_START=0x08180000 -DCM4_BINARY_END=0x08200000

envie_m7.menu.split.100_0.build.extra_ldflags=-DCM4_BINARY_START=0x60000000 -DCM4_BINARY_END=0x60040000 -DCM4_RAM_END=0x60080000

envie_m7.build.board={build.variant}

envie_m7.build.ldscript=linker_script.ld

envie_m7.build.slot_size=0x1E0000

envie_m7.build.header_size=0x20000

envie_m7.build.alignment=32

envie_m7.build.version=1.2.3+4

envie_m7.menu.security.sien.recipe.hooks.objcopy.postobjcopy.1.pattern="{tools.imgtool.path}/{tools.imgtool.cmd}" {tools.imgtool.flags}

envie_m7.menu.security.sien.build.keys.keychain={runtime.platform.path}/libraries/MCUboot/default_keys

envie_m7.menu.security.sien.build.keys.sign_key=ecdsa-p256-signing-priv-key.pem

envie_m7.menu.security.sien.build.keys.encrypt_key=ecdsa-p256-encrypt-pub-key.pem

envie_m7.compiler.mbed.defines={build.variant.path}/defines.txt

envie_m7.compiler.mbed.ldflags={build.variant.path}/ldflags.txt

envie_m7.compiler.mbed.cflags={build.variant.path}/cflags.txt

envie_m7.compiler.mbed.cxxflags={build.variant.path}/cxxflags.txt

envie_m7.compiler.mbed.includes={build.variant.path}/../PORTENTA_H7_M7/includes.txt

envie_m7.compiler.mbed.extra_ldflags=-lstdc++ -lsupc++ -lm -lc -lgcc -lnosys

envie_m7.compiler.mbed="{build.variant.path}/libs/libmbed.a"

envie_m7.vid.0=0x2341

envie_m7.pid.0=0x025b

envie_m7.vid.1=0x2341

envie_m7.pid.1=0x035b

envie_m7.vid.2=0x2341

envie_m7.pid.2=0x045b

envie_m7.vid.3=0x2341

envie_m7.pid.3=0x055b

envie_m7.upload_port.0.vid=0x2341

envie_m7.upload_port.0.pid=0x025b

envie_m7.upload_port.1.vid=0x2341

envie_m7.upload_port.1.pid=0x035b

envie_m7.upload_port.2.vid=0x2341

envie_m7.upload_port.2.pid=0x045b

envie_m7.upload_port.3.vid=0x2341

envie_m7.upload_port.3.pid=0x055b

envie_m7.upload.tool=dfu-util

envie_m7.upload.tool.default=dfu-util

envie_m7.upload.protocol=

envie_m7.upload.transport=

envie_m7.upload.vid=0x2341

envie_m7.upload.pid=0x035b

envie_m7.upload.use_1200bps_touch=true

envie_m7.upload.wait_for_upload_port=true

envie_m7.upload.native_usb=true

envie_m7.menu.security.none.upload.interface=0

envie_m7.menu.security.sien.upload.interface=2

envie_m7.menu.security.none.upload.address_m7=0x08040000

envie_m7.menu.security.sien.upload.address_m7=0xA0000000

envie_m7.menu.target_core.cm7.upload.address={upload.address_m7}

envie_m7.menu.target_core.cm7.menu.split.50_50.upload.maximum_size=786432

envie_m7.menu.target_core.cm7.menu.split.75_25.upload.maximum_size=1441792

envie_m7.menu.target_core.cm7.menu.split.100_0.upload.maximum_size=1966080

envie_m7.menu.target_core.cm7.upload.maximum_data_size=523624

envie_m7.menu.split.50_50.upload.address_m4=0x08100000

envie_m7.menu.split.75_25.upload.address_m4=0x08180000

#make loading the M4 in this way fail - the user needs to provide a file via mass storage or similar interfaces

envie_m7.menu.split.100_0.upload.address_m4=

envie_m7.menu.target_core.cm4.upload.address={upload.address_m4}

envie_m7.menu.target_core.cm4.menu.split.50_50.upload.maximum_size=1048576

envie_m7.menu.target_core.cm4.menu.split.75_25.upload.maximum_size=524288

envie_m7.menu.target_core.cm4.menu.split.100_0.upload.maximum_size=524288

envie_m7.menu.target_core.cm4.upload.maximum_data_size=294248

envie_m7.debug.tool=gdb

envie_m7.bootloader.tool=openocd

envie_m7.bootloader.tool.default=openocd

envie_m7.bootloader.config=-f target/stm32h7x_dual_bank.cfg

envie_m7.bootloader.programmer=-f interface/stlink.cfg

envie_m7.bootloader.extra_action.preflash=stm32h7x option_write 0 0x01c 0xb86aaf0

envie_m7.bootloader.file=PORTENTA_H7/portentah7_bootloader_mbed_hs_v2.hex

envie_m7.debug.server.openocd.scripts.0=interface/{programmer.protocol}.cfg

envie_m7.debug.server.openocd.scripts.1={programmer.transport_script}

envie_m7.debug.server.openocd.scripts.2=target/stm32h7x_dual_bank.cfg

envie_m7.debug.cortex-debug.custom.request=attach

envie_m7.menu.target_core.cm7.debug.svd_file={runtime.platform.path}/svd/STM32H747_CM7.svd

envie_m7.menu.target_core.cm4.debug.svd_file={runtime.platform.path}/svd/STM32H747_CM4.svd

envie_m7_thread_debug.name=Arduino Portenta H7 (ThreadDebug)

envie_m7_thread_debug.vid.0=0x2341

envie_m7_thread_debug.pid.0=0x025B

envie_m7_thread_debug.upload_port.0.vid=0x2341

envie_m7_thread_debug.upload_port.0.pid=0x025B

envie_m7_thread_debug.descriptor.0=DebugPort

envie_m7_thread_debug.hide=true

envie_m7_thread_debug.build.board=PORTENTA_H7_M7

##############################################################

portenta_x8.name=Arduino Portenta X8

portenta_x8.build.core=arduino

portenta_x8.build.crossprefix=arm-none-eabi-

portenta_x8.build.compiler_path={runtime.tools.arm-none-eabi-gcc-7-2017q4.path}/bin/

portenta_x8.build.variant=PORTENTA_X8

portenta_x8.build.mcu=cortex-m4

portenta_x8.build.fpu=-mfpu=fpv4-sp-d16

portenta_x8.build.float-abi=-mfloat-abi=softfp

portenta_x8.build.extra_flags=

portenta_x8.build.extra_ldflags=-DCM4_BINARY_START=0x08100000 -DCM4_BINARY_END=0x08200000

portenta_x8.build.architecture=cortex-m4

portenta_x8.build.board=PORTENTA_X8

portenta_x8.build.ldscript=linker_script.ld

portenta_x8.compiler.mbed.arch.define=

portenta_x8.compiler.mbed.defines={build.variant.path}/defines.txt

portenta_x8.compiler.mbed.ldflags={build.variant.path}/ldflags.txt

portenta_x8.compiler.mbed.cflags={build.variant.path}/cflags.txt

portenta_x8.compiler.mbed.cxxflags={build.variant.path}/cxxflags.txt

portenta_x8.compiler.mbed.includes={build.variant.path}/includes.txt

portenta_x8.compiler.mbed.extra_ldflags=-lstdc++ -lsupc++ -lm -lc -lgcc -lnosys

portenta_x8.compiler.mbed="{build.variant.path}/libs/libmbed.a"

portenta_x8.vid.0=0x2341

portenta_x8.pid.0=0x0061

portenta_x8.build.vid=0x2341

portenta_x8.build.pid=0x0061

portenta_x8.upload_port.0.vid=0x2341

portenta_x8.upload_port.0.pid=0x0061

portenta_x8.upload.tool=adb

portenta_x8.upload.tool.default=adb

portenta_x8.upload.vid=0x2341

portenta_x8.upload.pid=0x0061

portenta_x8.upload.protocol=

portenta_x8.upload.transport=

portenta_x8.upload.interface=0

portenta_x8.upload.use_1200bps_touch=false

portenta_x8.upload.wait_for_upload_port=false

portenta_x8.upload.native_usb=true

portenta_x8.upload.maximum_data_size=294248

portenta_x8.debug.tool=gdb

portenta_x8.bootloader.tool=openocd

portenta_x8.bootloader.tool.default=openocd

portenta_x8.bootloader.config=-f target/stm32h7x_dual_bank.cfg

portenta_x8.bootloader.programmer=-f interface/stlink.cfg

portenta_x8.bootloader.extra_action.preflash=stm32h7x option_write 0 0x01c 0xb86aaf0

portenta_x8.bootloader.file=PORTENTA_X7/STM32H747AII6_CM7.elf

##############################################################

nano33ble.name=Arduino Nano 33 BLE

nano33ble.build.core=arduino

nano33ble.build.crossprefix=arm-none-eabi-

nano33ble.build.compiler_path={runtime.tools.arm-none-eabi-gcc-7-2017q4.path}/bin/

nano33ble.build.variant=ARDUINO_NANO33BLE

nano33ble.build.mcu=cortex-m4

nano33ble.build.extra_flags=

nano33ble.build.architecture=cortex-m4

nano33ble.build.fpu=-mfpu=fpv4-sp-d16

nano33ble.build.float-abi=-mfloat-abi=softfp

nano33ble.build.board=ARDUINO_NANO33BLE

nano33ble.build.ldscript=linker_script.ld

nano33ble.compiler.mbed.arch.define=-DARDUINO_ARCH_NRF52840

nano33ble.compiler.mbed.defines={build.variant.path}/defines.txt

nano33ble.compiler.mbed.ldflags={build.variant.path}/ldflags.txt

nano33ble.compiler.mbed.cflags={build.variant.path}/cflags.txt

nano33ble.compiler.mbed.cxxflags={build.variant.path}/cxxflags.txt

nano33ble.compiler.mbed.includes={build.variant.path}/includes.txt

nano33ble.compiler.mbed.extra_ldflags=-lstdc++ -lsupc++ -lm -lc -lgcc -lnosys

nano33ble.compiler.mbed="{build.variant.path}/libs/libmbed.a" "{build.variant.path}/libs/libcc_310_core.a" "{build.variant.path}/libs/libcc_310_ext.a" "{build.variant.path}/libs/libcc_310_trng.a"

nano33ble.vid.0=0x2341

nano33ble.pid.0=0x005a

nano33ble.vid.1=0x2341

nano33ble.pid.1=0x805a

nano33ble.vid.2=0x2341

nano33ble.pid.2=0x015a

nano33ble.vid.3=0x2341

nano33ble.pid.3=0x025a

nano33ble.upload_port.0.vid=0x2341

nano33ble.upload_port.0.pid=0x005a

nano33ble.upload_port.1.vid=0x2341

nano33ble.upload_port.1.pid=0x805a

nano33ble.upload_port.2.vid=0x2341

nano33ble.upload_port.2.pid=0x015a

nano33ble.upload_port.3.vid=0x2341

nano33ble.upload_port.3.pid=0x025a

nano33ble.upload.tool=bossac

nano33ble.upload.tool.default=bossac

nano33ble.upload.protocol=

nano33ble.upload.transport=

nano33ble.upload.use_1200bps_touch=true

nano33ble.upload.wait_for_upload_port=true

nano33ble.upload.native_usb=true

nano33ble.upload.maximum_size=983040

nano33ble.upload.maximum_data_size=262144

nano33ble.bootloader.tool=openocd

nano33ble.bootloader.tool.default=openocd

nano33ble.bootloader.extra_action.preflash=echo INFO:removed_mass-erase

nano33ble.bootloader.config=-f target/nrf52.cfg

nano33ble.bootloader.programmer=-f interface/cmsis-dap.cfg

nano33ble.bootloader.file=nano33ble/bootloader.hex

nano33ble.debug.server.openocd.scripts.0=interface/{programmer.protocol}.cfg

nano33ble.debug.server.openocd.scripts.1={programmer.transport_script}

nano33ble.debug.server.openocd.scripts.2=target/nrf52.cfg

nano33ble.debug.svd_file={runtime.platform.path}/svd/nrf52840.svd

##############################################################

nanorp2040connect.name=Arduino Nano RP2040 Connect

nanorp2040connect.build.core=arduino

nanorp2040connect.build.crossprefix=arm-none-eabi-

nanorp2040connect.build.compiler_path={runtime.tools.arm-none-eabi-gcc-7-2017q4.path}/bin/

nanorp2040connect.build.variant=NANO_RP2040_CONNECT

nanorp2040connect.build.mcu=cortex-m0plus

nanorp2040connect.build.extra_flags=

nanorp2040connect.build.fpu=

nanorp2040connect.build.float-abi=

nanorp2040connect.build.architecture=cortex-m0plus

nanorp2040connect.build.board=NANO_RP2040_CONNECT

nanorp2040connect.build.ldscript=linker_script.ld

nanorp2040connect.compiler.mbed.arch.define=-DARDUINO_ARCH_RP2040

nanorp2040connect.compiler.mbed.defines={build.variant.path}/defines.txt

nanorp2040connect.compiler.mbed.ldflags={build.variant.path}/ldflags.txt

nanorp2040connect.compiler.mbed.cflags={build.variant.path}/cflags.txt

nanorp2040connect.compiler.mbed.cxxflags={build.variant.path}/cxxflags.txt

nanorp2040connect.compiler.mbed.includes={build.variant.path}/includes.txt

nanorp2040connect.compiler.mbed.extra_ldflags=-lstdc++ -lsupc++ -lm -lc -lgcc -lnosys

nanorp2040connect.compiler.mbed="{build.variant.path}/libs/libmbed.a"

nanorp2040connect.recipe.hooks.objcopy.postobjcopy.1.pattern="{runtime.tools.rp2040tools.path}/elf2uf2" "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.uf2"

nanorp2040connect.vid.0=0x2341

nanorp2040connect.pid.0=0x005e

nanorp2040connect.vid.1=0x2341

nanorp2040connect.pid.1=0x805e

nanorp2040connect.vid.2=0x2341

nanorp2040connect.pid.2=0x015e

nanorp2040connect.vid.3=0x2341

nanorp2040connect.pid.3=0x025e

nanorp2040connect.upload_port.0.vid=0x2341

nanorp2040connect.upload_port.0.pid=0x005e

nanorp2040connect.upload_port.1.vid=0x2341

nanorp2040connect.upload_port.1.pid=0x805e

nanorp2040connect.upload_port.2.vid=0x2341

nanorp2040connect.upload_port.2.pid=0x015e

nanorp2040connect.upload_port.3.vid=0x2341

nanorp2040connect.upload_port.3.pid=0x025e

nanorp2040connect.upload.tool=picotool

nanorp2040connect.upload.tool.default=picotool

nanorp2040connect.upload.protocol=

nanorp2040connect.upload.transport=

nanorp2040connect.upload.use_1200bps_touch=true

nanorp2040connect.upload.wait_for_upload_port=false

nanorp2040connect.upload.native_usb=true

nanorp2040connect.upload.maximum_size=16777216

nanorp2040connect.upload.maximum_data_size=270336

nanorp2040connect.bootloader.tool=openocd

nanorp2040connect.bootloader.tool.default=openocd

nanorp2040connect.bootloader.config=-f target/rp2040.cfg

nanorp2040connect.bootloader.programmer=-f interface/cmsis-dap.cfg

nanorp2040connect.debug.server.openocd.scripts.0=interface/{programmer.protocol}.cfg

nanorp2040connect.debug.server.openocd.scripts.1={programmer.transport_script}

nanorp2040connect.debug.server.openocd.scripts.2=target/rp2040-core0.cfg

nanorp2040connect.debug.svd_file={runtime.platform.path}/svd/rp2040.svd

##############################################################

pico.name=Raspberry Pi Pico

pico.build.core=arduino

pico.build.crossprefix=arm-none-eabi-

pico.build.compiler_path={runtime.tools.arm-none-eabi-gcc-7-2017q4.path}/bin/

pico.build.variant=RASPBERRY_PI_PICO

pico.build.mcu=cortex-m0plus

pico.build.extra_flags=

pico.build.fpu=

pico.build.float-abi=

pico.build.architecture=cortex-m0plus

pico.build.board=RASPBERRY_PI_PICO

pico.build.ldscript=linker_script.ld

pico.compiler.mbed.arch.define=-DARDUINO_ARCH_RP2040

pico.compiler.mbed.defines={build.variant.path}/defines.txt

pico.compiler.mbed.ldflags={build.variant.path}/ldflags.txt

pico.compiler.mbed.cflags={build.variant.path}/cflags.txt

pico.compiler.mbed.cxxflags={build.variant.path}/cxxflags.txt

pico.compiler.mbed.includes={build.variant.path}/includes.txt

pico.compiler.mbed.extra_ldflags=-lstdc++ -lsupc++ -lm -lc -lgcc -lnosys

pico.compiler.mbed="{build.variant.path}/libs/libmbed.a"

pico.recipe.hooks.objcopy.postobjcopy.1.pattern="{runtime.tools.rp2040tools.path}/elf2uf2" "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.uf2"

pico.vid.0=0x2e8a

pico.pid.0=0x00C0

pico.upload_port.0.vid=0x2e8a

pico.upload_port.0.pid=0x00C0

pico.upload.tool=picotool

pico.upload.tool.default=picotool

pico.upload.protocol=

pico.upload.transport=

pico.upload.use_1200bps_touch=true

pico.upload.wait_for_upload_port=false

pico.upload.native_usb=true

pico.upload.maximum_size=2097152

pico.upload.maximum_data_size=270336

pico.bootloader.tool=openocd

pico.bootloader.tool.default=openocd

pico.bootloader.config=-f target/rp2040.cfg

pico.bootloader.programmer=-f interface/cmsis-dap.cfg

pico.debug.server.openocd.scripts.0=interface/{programmer.protocol}.cfg

pico.debug.server.openocd.scripts.1={programmer.transport_script}

pico.debug.server.openocd.scripts.2=target/rp2040-core0.cfg

pico.debug.svd_file={runtime.platform.path}/svd/rp2040.svd

##############################################################

nicla_sense.name=Arduino Nicla Sense ME

nicla_sense.build.core=arduino

nicla_sense.build.crossprefix=arm-none-eabi-

nicla_sense.build.compiler_path={runtime.tools.arm-none-eabi-gcc-7-2017q4.path}/bin/

nicla_sense.build.variant=NICLA

nicla_sense.build.mcu=cortex-m4

nicla_sense.build.extra_flags=

nicla_sense.build.architecture=cortex-m4

nicla_sense.build.fpu=-mfpu=fpv4-sp-d16

nicla_sense.build.float-abi=-mfloat-abi=softfp

nicla_sense.build.board=NICLA

nicla_sense.build.ldscript=linker_script.ld

nicla_sense.compiler.mbed.arch.define=-DARDUINO_ARCH_NRF52832

nicla_sense.compiler.mbed.defines={build.variant.path}/defines.txt

nicla_sense.compiler.mbed.ldflags={build.variant.path}/ldflags.txt

nicla_sense.compiler.mbed.cflags={build.variant.path}/cflags.txt

nicla_sense.compiler.mbed.cxxflags={build.variant.path}/cxxflags.txt

nicla_sense.compiler.mbed.includes={build.variant.path}/includes.txt

nicla_sense.compiler.mbed.extra_ldflags=-lstdc++ -lsupc++ -lm -lc -lgcc -lnosys

nicla_sense.compiler.mbed="{build.variant.path}/libs/libmbed.a"

nicla_sense.vid.0=0x2341

nicla_sense.pid.0=0x0060

nicla_sense.upload_port.0.vid=0x2341

nicla_sense.upload_port.0.pid=0x0060

nicla_sense.upload.tool=openocd

nicla_sense.upload.tool.default=openocd

nicla_sense.upload.protocol=

nicla_sense.upload.config=-f target/nrf52.cfg

nicla_sense.upload.programmer=-f interface/cmsis-dap.cfg

nicla_sense.upload.transport=-c "transport select swd; adapter speed 1000"

nicla_sense.upload.use_1200bps_touch=false

nicla_sense.upload.wait_for_upload_port=true

nicla_sense.upload.native_usb=true

nicla_sense.upload.maximum_size=527616

nicla_sense.upload.maximum_data_size=64288

nicla_sense.programmer.protocol=cmsis-dap

nicla_sense.programmer.transport_script="{runtime.platform.path}/debugger/select_swd.cfg"

nicla_sense.bootloader.tool=openocd

nicla_sense.bootloader.tool.default=openocd

nicla_sense.bootloader.extra_action.preflash=echo INFO:removed_mass-erase

nicla_sense.bootloader.config=-f target/nrf52.cfg

nicla_sense.bootloader.programmer=-f interface/cmsis-dap.cfg

nicla_sense.bootloader.file=NICLA/bootloader.hex

nicla_sense.debug.server.openocd.scripts.0=interface/{programmer.protocol}.cfg

nicla_sense.debug.server.openocd.scripts.1={programmer.transport_script}

nicla_sense.debug.server.openocd.scripts.2=target/nrf52.cfg

nicla_sense.debug.svd_file={runtime.platform.path}/svd/nrf52833.svd

##############################################################

nicla_voice.name=Arduino Nicla Voice

nicla_voice.build.core=arduino

nicla_voice.build.crossprefix=arm-none-eabi-

nicla_voice.build.compiler_path={runtime.tools.arm-none-eabi-gcc-7-2017q4.path}/bin/

nicla_voice.build.variant=NICLA

nicla_voice.build.mcu=cortex-m4

nicla_voice.build.extra_flags=

nicla_voice.build.architecture=cortex-m4

nicla_voice.build.fpu=-mfpu=fpv4-sp-d16

nicla_voice.build.float-abi=-mfloat-abi=softfp

nicla_voice.build.board=NICLA

nicla_voice.build.ldscript=linker_script.ld

nicla_voice.build.postbuild.cmd="{tools.imgtool.path}/{tools.imgtool.cmd}" exit

nicla_voice.compiler.mbed.arch.define=-DARDUINO_ARCH_NRF52832

nicla_voice.compiler.mbed.defines={build.variant.path}/defines.txt

nicla_voice.compiler.mbed.ldflags={build.variant.path}/ldflags.txt

nicla_voice.compiler.mbed.cflags={build.variant.path}/cflags.txt

nicla_voice.compiler.mbed.cxxflags={build.variant.path}/cxxflags.txt

nicla_voice.compiler.mbed.includes={build.variant.path}/includes.txt

nicla_voice.compiler.mbed.extra_ldflags=-lstdc++ -lsupc++ -lm -lc -lgcc -lnosys

nicla_voice.compiler.mbed="{build.variant.path}/libs/libmbed.a"

nicla_voice.vid.0=0x2341

nicla_voice.pid.0=0x0065

nicla_voice.upload_port.0.vid=0x2341

nicla_voice.upload_port.0.pid=0x0065

nicla_voice.upload.tool=openocd

nicla_voice.upload.tool.default=openocd

nicla_voice.upload.protocol=

nicla_voice.upload.config=-f target/nrf52.cfg

nicla_voice.upload.programmer=-f interface/cmsis-dap.cfg

nicla_voice.upload.transport=-c "transport select swd; adapter speed 1000"

nicla_voice.upload.use_1200bps_touch=false

nicla_voice.upload.wait_for_upload_port=true

nicla_voice.upload.native_usb=true

nicla_voice.upload.maximum_size=527616

nicla_voice.upload.maximum_data_size=64288

nicla_voice.programmer.protocol=cmsis-dap

nicla_voice.programmer.transport_script="{runtime.platform.path}/debugger/select_swd.cfg"

nicla_voice.bootloader.tool=openocd

nicla_voice.bootloader.tool.default=openocd

nicla_voice.bootloader.extra_action.preflash=echo INFO:removed_mass-erase

nicla_voice.bootloader.config=-f target/nrf52.cfg

nicla_voice.bootloader.programmer=-f interface/cmsis-dap.cfg

nicla_voice.bootloader.file=NICLA_VOICE/bootloader_application.hex

nicla_voice.debug.server.openocd.scripts.0=interface/{programmer.protocol}.cfg

nicla_voice.debug.server.openocd.scripts.1={programmer.transport_script}

nicla_voice.debug.server.openocd.scripts.2=target/nrf52.cfg

nicla_voice.debug.svd_file={runtime.platform.path}/svd/nrf52833.svd

##############################################################

nicla_vision.name=Arduino Nicla Vision

nicla_vision.build.core=arduino

nicla_vision.build.crossprefix=arm-none-eabi-

nicla_vision.build.compiler_path={runtime.tools.arm-none-eabi-gcc-7-2017q4.path}/bin/

nicla_vision.menu.target_core.cm7=Main Core

nicla_vision.menu.target_core.cm4=M4 Co-processor

nicla_vision.menu.split.100_0=2MB M7

nicla_vision.menu.split.75_25=1.5MB M7 + 0.5MB M4

nicla_vision.menu.split.50_50=1MB M7 + 1MB M4

nicla_vision.menu.target_core.cm7.build.variant=NICLA_VISION

nicla_vision.menu.target_core.cm7.build.mcu=cortex-m7

nicla_vision.menu.target_core.cm7.build.fpu=-mfpu=fpv5-d16

nicla_vision.menu.target_core.cm7.build.architecture=cortex-m7

nicla_vision.menu.target_core.cm7.compiler.mbed.arch.define=

nicla_vision.menu.target_core.cm4.build.variant=GENERIC_STM32H747_M4

nicla_vision.menu.target_core.cm4.build.mcu=cortex-m4

nicla_vision.menu.target_core.cm4.build.fpu=-mfpu=fpv4-sp-d16

nicla_vision.menu.target_core.cm4.build.architecture=cortex-m4

nicla_vision.menu.target_core.cm4.compiler.mbed.arch.define=-DNVISION_PINS

nicla_vision.menu.split.50_50.build.extra_ldflags=-DCM4_BINARY_START=0x08100000 -DCM4_BINARY_END=0x08200000

nicla_vision.menu.split.75_25.build.extra_ldflags=-DCM4_BINARY_START=0x08180000 -DCM4_BINARY_END=0x08200000

nicla_vision.menu.split.100_0.build.extra_ldflags=-DCM4_BINARY_START=0x60000000 -DCM4_BINARY_END=0x60040000 -DCM4_RAM_END=0x60080000

nicla_vision.build.board={build.variant}

nicla_vision.build.float-abi=-mfloat-abi=softfp

nicla_vision.build.extra_flags=

nicla_vision.build.ldscript=linker_script.ld

nicla_vision.compiler.mbed.defines={build.variant.path}/defines.txt

nicla_vision.compiler.mbed.ldflags={build.variant.path}/ldflags.txt

nicla_vision.compiler.mbed.cflags={build.variant.path}/cflags.txt

nicla_vision.compiler.mbed.cxxflags={build.variant.path}/cxxflags.txt

nicla_vision.compiler.mbed.includes={build.variant.path}/../NICLA_VISION/includes.txt

nicla_vision.compiler.mbed.extra_ldflags=-lstdc++ -lsupc++ -lm -lc -lgcc -lnosys

nicla_vision.compiler.mbed="{build.variant.path}/libs/libmbed.a"

nicla_vision.vid.0=0x2341

nicla_vision.pid.0=0x025f

nicla_vision.vid.1=0x2341

nicla_vision.pid.1=0x035f

nicla_vision.vid.2=0x2341

nicla_vision.pid.2=0x045f

nicla_vision.vid.3=0x2341

nicla_vision.pid.3=0x055f

nicla_vision.upload_port.0.vid=0x2341

nicla_vision.upload_port.0.pid=0x025f

nicla_vision.upload_port.1.vid=0x2341

nicla_vision.upload_port.1.pid=0x035f

nicla_vision.upload_port.2.vid=0x2341

nicla_vision.upload_port.2.pid=0x045f

nicla_vision.upload_port.3.vid=0x2341

nicla_vision.upload_port.3.pid=0x055f

nicla_vision.upload.tool=dfu-util

nicla_vision.upload.tool.default=dfu-util

nicla_vision.upload.protocol=

nicla_vision.upload.transport=

nicla_vision.upload.vid=0x2341

nicla_vision.upload.pid=0x035f

nicla_vision.upload.interface=0

nicla_vision.upload.use_1200bps_touch=true

nicla_vision.upload.wait_for_upload_port=true

nicla_vision.upload.native_usb=true

nicla_vision.upload.maximum_size=1966080

nicla_vision.upload.maximum_data_size=523624

nicla_vision.menu.target_core.cm7.upload.address=0x08040000

nicla_vision.menu.target_core.cm7.menu.split.50_50.upload.maximum_size=786432

nicla_vision.menu.target_core.cm7.menu.split.75_25.upload.maximum_size=1441792

nicla_vision.menu.target_core.cm7.menu.split.100_0.upload.maximum_size=1966080

nicla_vision.menu.target_core.cm7.upload.maximum_data_size=523624

nicla_vision.menu.split.50_50.upload.address_m4=0x08100000

nicla_vision.menu.split.75_25.upload.address_m4=0x08180000

#make loading the M4 in this way fail - the user needs to provide a file via mass storage or similar interfaces

nicla_vision.menu.split.100_0.upload.address_m4=

nicla_vision.menu.target_core.cm4.upload.address={upload.address_m4}

nicla_vision.menu.target_core.cm4.menu.split.50_50.upload.maximum_size=1048576

nicla_vision.menu.target_core.cm4.menu.split.75_25.upload.maximum_size=524288

nicla_vision.menu.target_core.cm4.menu.split.100_0.upload.maximum_size=524288

nicla_vision.menu.target_core.cm4.upload.maximum_data_size=294248

nicla_vision.debug.tool=gdb

nicla_vision.bootloader.tool=openocd

nicla_vision.bootloader.tool.default=openocd

nicla_vision.bootloader.config=-f target/stm32h7x_dual_bank.cfg

nicla_vision.bootloader.programmer=-f interface/stlink.cfg

nicla_vision.bootloader.extra_action.preflash=stm32h7x option_write 0 0x01c 0xb86aaf0

nicla_vision.bootloader.file=NICLA_VISION/bootloader.hex

nicla_vision.debug.server.openocd.scripts.0=interface/{programmer.protocol}.cfg

nicla_vision.debug.server.openocd.scripts.1={programmer.transport_script}

nicla_vision.debug.server.openocd.scripts.2=target/stm32h7x_dual_bank.cfg

nicla_vision.debug.cortex-debug.custom.request=attach

nicla_vision.menu.target_core.cm7.debug.svd_file={runtime.platform.path}/svd/STM32H747_CM7.svd

nicla_vision.menu.target_core.cm4.debug.svd_file={runtime.platform.path}/svd/STM32H747_CM4.svd

##############################################################

opta.name=Opta

opta.build.core=arduino

opta.build.crossprefix=arm-none-eabi-

opta.build.compiler_path={runtime.tools.arm-none-eabi-gcc-7-2017q4.path}/bin/

opta.menu.target_core.cm7=Main Core

opta.menu.target_core.cm4=M4 Co-processor

opta.menu.split.100_0=2MB M7

opta.menu.split.75_25=1.5MB M7 + 0.5MB M4

opta.menu.split.50_50=1MB M7 + 1MB M4

opta.menu.security.none=None

opta.menu.security.sien=Signature + Encryption

opta.menu.target_core.cm7.build.variant=OPTA

opta.menu.target_core.cm7.build.mcu=cortex-m7

opta.menu.target_core.cm7.build.fpu=-mfpu=fpv5-d16

opta.menu.target_core.cm7.build.architecture=cortex-m7

opta.menu.target_core.cm7.compiler.mbed.arch.define=

opta.menu.target_core.cm4.build.variant=GENERIC_STM32H747_M4

opta.menu.target_core.cm4.build.mcu=cortex-m4

opta.menu.target_core.cm4.build.fpu=-mfpu=fpv4-sp-d16

opta.menu.target_core.cm4.build.architecture=cortex-m4

opta.menu.target_core.cm4.compiler.mbed.arch.define=-DOPTA_PINS

opta.build.float-abi=-mfloat-abi=softfp

opta.build.extra_flags=

opta.menu.split.50_50.build.extra_ldflags=-DCM4_BINARY_START=0x08100000 -DCM4_BINARY_END=0x08200000

opta.menu.split.75_25.build.extra_ldflags=-DCM4_BINARY_START=0x08180000 -DCM4_BINARY_END=0x08200000

opta.menu.split.100_0.build.extra_ldflags=-DCM4_BINARY_START=0x60000000 -DCM4_BINARY_END=0x60040000 -DCM4_RAM_END=0x60080000

opta.build.board={build.variant}

opta.build.ldscript=linker_script.ld

opta.compiler.mbed.arch.define=

opta.build.slot_size=0x1E0000

opta.build.header_size=0x20000

opta.build.alignment=32

opta.build.version=1.2.3+4

opta.menu.security.sien.recipe.hooks.objcopy.postobjcopy.1.pattern="{tools.imgtool.path}/{tools.imgtool.cmd}" {tools.imgtool.flags}

opta.menu.security.sien.build.keys.keychain={runtime.platform.path}/libraries/MCUboot/default_keys

opta.menu.security.sien.build.keys.sign_key=ecdsa-p256-signing-priv-key.pem

opta.menu.security.sien.build.keys.encrypt_key=ecdsa-p256-encrypt-pub-key.pem

opta.compiler.mbed.defines={build.variant.path}/defines.txt

opta.compiler.mbed.ldflags={build.variant.path}/ldflags.txt

opta.compiler.mbed.cflags={build.variant.path}/cflags.txt

opta.compiler.mbed.cxxflags={build.variant.path}/cxxflags.txt

opta.compiler.mbed.includes={build.variant.path}/../OPTA/includes.txt

opta.compiler.mbed.extra_ldflags=-lstdc++ -lsupc++ -lm -lc -lgcc -lnosys

opta.compiler.mbed="{build.variant.path}/libs/libmbed.a"

opta.vid.0=0x2341

opta.pid.0=0x0064

opta.vid.1=0x2341

opta.pid.1=0x0164

opta.vid.2=0x2341

opta.pid.2=0x0264

opta.vid.3=0x2341

opta.pid.3=0x0364

opta.vid.4=0x35d1

opta.pid.4=0x0064

opta.vid.5=0x35d1

opta.pid.5=0x0164

opta.vid.6=0x35d1

opta.pid.6=0x0264

opta.vid.7=0x35d1

opta.pid.7=0x0364

opta.upload_port.0.vid=0x2341

opta.upload_port.0.pid=0x0064

opta.upload_port.1.vid=0x2341

opta.upload_port.1.pid=0x0164

opta.upload_port.2.vid=0x2341

opta.upload_port.2.pid=0x0264

opta.upload_port.3.vid=0x2341

opta.upload_port.3.pid=0x0364

opta.upload_port.4.vid=0x35d1

opta.upload_port.4.pid=0x0064

opta.upload_port.5.vid=0x35d1

opta.upload_port.5.pid=0x0164

opta.upload_port.6.vid=0x35d1

opta.upload_port.6.pid=0x0264

opta.upload_port.7.vid=0x35d1

opta.upload_port.7.pid=0x0364

opta.upload.tool=dfu-util

opta.upload.tool.default=dfu-util

opta.upload.protocol=

opta.upload.transport=

opta.upload.vid=0x2341

opta.upload.pid=0x0364

opta.upload.address=0x08040000

opta.upload.interface=0

opta.upload.use_1200bps_touch=true

opta.upload.wait_for_upload_port=true

opta.upload.native_usb=true

opta.upload.maximum_size=1966080

opta.upload.maximum_data_size=523624

opta.menu.security.none.upload.interface=0

opta.menu.security.sien.upload.interface=2

opta.menu.security.none.upload.address_m7=0x08040000

opta.menu.security.sien.upload.address_m7=0xA0000000

opta.menu.target_core.cm7.upload.address={upload.address_m7}

opta.menu.target_core.cm7.menu.split.50_50.upload.maximum_size=786432

opta.menu.target_core.cm7.menu.split.75_25.upload.maximum_size=1441792

opta.menu.target_core.cm7.menu.split.100_0.upload.maximum_size=1966080

opta.menu.target_core.cm7.upload.maximum_data_size=523624

opta.menu.split.50_50.upload.address_m4=0x08100000

opta.menu.split.75_25.upload.address_m4=0x08180000

#make loading the M4 in this way fail - the user needs to provide a file via mass storage or similar interfaces

opta.menu.split.100_0.upload.address_m4=

opta.menu.target_core.cm4.upload.address={upload.address_m4}

opta.menu.target_core.cm4.menu.split.50_50.upload.maximum_size=1048576

opta.menu.target_core.cm4.menu.split.75_25.upload.maximum_size=524288

opta.menu.target_core.cm4.menu.split.100_0.upload.maximum_size=524288

opta.menu.target_core.cm4.upload.maximum_data_size=294248

opta.debug.tool=gdb

opta.bootloader.tool=openocd

opta.bootloader.tool.default=openocd

opta.bootloader.config=-f target/stm32h7x_dual_bank.cfg

opta.bootloader.programmer=-f interface/stlink.cfg

opta.bootloader.extra_action.preflash=stm32h7x option_write 0 0x01c 0xb86aaf0

opta.bootloader.file=OPTA/bootloader.hex

opta.debug.server.openocd.scripts.0=interface/{programmer.protocol}.cfg

opta.debug.server.openocd.scripts.1={programmer.transport_script}

opta.debug.server.openocd.scripts.2=target/stm32h7x_dual_bank.cfg

opta.debug.cortex-debug.custom.request=attach

opta.menu.target_core.cm7.debug.svd_file={runtime.platform.path}/svd/STM32H747_CM7.svd

opta.menu.target_core.cm4.debug.svd_file={runtime.platform.path}/svd/STM32H747_CM4.svd

##############################################################

giga.name=Arduino Giga R1

giga.build.core=arduino

giga.build.crossprefix=arm-none-eabi-

giga.build.compiler_path={runtime.tools.arm-none-eabi-gcc-7-2017q4.path}/bin/

giga.menu.target_core.cm7=Main Core

giga.menu.target_core.cm4=M4 Co-processor

giga.menu.split.100_0=2MB M7 + M4 in SDRAM

giga.menu.split.75_25=1.5MB M7 + 0.5MB M4

giga.menu.split.50_50=1MB M7 + 1MB M4

giga.menu.security.none=None

giga.menu.security.sien=Signature + Encryption

giga.menu.target_core.cm7.build.variant=GIGA

giga.menu.target_core.cm7.build.mcu=cortex-m7

giga.menu.target_core.cm7.build.fpu=-mfpu=fpv5-d16

giga.menu.target_core.cm7.build.architecture=cortex-m7

giga.menu.target_core.cm7.compiler.mbed.arch.define=

giga.menu.target_core.cm4.build.variant=GENERIC_STM32H747_M4

giga.menu.target_core.cm4.build.mcu=cortex-m4

giga.menu.target_core.cm4.build.fpu=-mfpu=fpv4-sp-d16

giga.menu.target_core.cm4.build.architecture=cortex-m4

giga.menu.target_core.cm4.compiler.mbed.arch.define=-DGIGA_PINS

giga.menu.split.50_50.build.extra_ldflags=-DCM4_BINARY_START=0x08100000 -DCM4_BINARY_END=0x08200000

giga.menu.split.75_25.build.extra_ldflags=-DCM4_BINARY_START=0x08180000 -DCM4_BINARY_END=0x08200000

giga.menu.split.100_0.build.extra_ldflags=-DCM4_BINARY_START=0x60000000 -DCM4_BINARY_END=0x60040000 -DCM4_RAM_END=0x60080000

giga.build.board={build.variant}

giga.build.float-abi=-mfloat-abi=softfp

giga.build.extra_flags=

giga.build.postbuild.cmd="{tools.imgtool.path}/{tools.imgtool.cmd}" exit

giga.build.architecture=cortex-m7

giga.build.board=GIGA

giga.build.ldscript=linker_script.ld

giga.build.extra_ldflags=-DCM4_BINARY_START=0x08180000

giga.compiler.mbed.arch.define=

giga.build.slot_size=0x1E0000

giga.build.header_size=0x20000

giga.build.alignment=32

giga.build.version=1.2.3+4

giga.menu.security.sien.recipe.hooks.objcopy.postobjcopy.1.pattern="{tools.imgtool.path}/{tools.imgtool.cmd}" {tools.imgtool.flags}

giga.menu.security.sien.build.keys.keychain={runtime.platform.path}/libraries/MCUboot/default_keys

giga.menu.security.sien.build.keys.sign_key=ecdsa-p256-signing-priv-key.pem

giga.menu.security.sien.build.keys.encrypt_key=ecdsa-p256-encrypt-pub-key.pem

giga.compiler.mbed.defines={build.variant.path}/defines.txt

giga.compiler.mbed.ldflags={build.variant.path}/ldflags.txt

giga.compiler.mbed.cflags={build.variant.path}/cflags.txt

giga.compiler.mbed.cxxflags={build.variant.path}/cxxflags.txt

giga.compiler.mbed.includes={build.variant.path}/../GIGA/includes.txt

giga.compiler.mbed.extra_ldflags=-lstdc++ -lsupc++ -lm -lc -lgcc -lnosys

giga.compiler.mbed="{build.variant.path}/libs/libmbed.a"

giga.vid.0=0x2341

giga.pid.0=0x0266

giga.vid.1=0x2341

giga.pid.1=0x0366

giga.vid.2=0x2341

giga.pid.2=0x0466

giga.upload_port.0.vid=0x2341

giga.upload_port.0.pid=0x0266

giga.upload_port.1.vid=0x2341

giga.upload_port.1.pid=0x0366

giga.upload_port.2.vid=0x2341

giga.upload_port.2.pid=0x0466

giga.upload.tool=dfu-util

giga.upload.tool.default=dfu-util

giga.upload.protocol=

giga.upload.transport=

giga.upload.vid=0x2341

giga.upload.pid=0x0366

giga.upload.interface=0

giga.upload.use_1200bps_touch=true

giga.upload.wait_for_upload_port=true

giga.upload.native_usb=true

giga.upload.maximum_size=1966080

giga.upload.maximum_data_size=523624

giga.menu.security.none.upload.interface=0

giga.menu.security.sien.upload.interface=2

giga.menu.security.none.upload.address_m7=0x08040000

giga.menu.security.sien.upload.address_m7=0xA0000000

giga.menu.target_core.cm7.upload.address={upload.address_m7}

giga.menu.target_core.cm7.menu.split.50_50.upload.maximum_size=786432

giga.menu.target_core.cm7.menu.split.75_25.upload.maximum_size=1441792

giga.menu.target_core.cm7.menu.split.100_0.upload.maximum_size=1966080

giga.menu.target_core.cm7.upload.maximum_data_size=523624

giga.menu.split.50_50.upload.address_m4=0x08100000

giga.menu.split.75_25.upload.address_m4=0x08180000

#make loading the M4 in this way fail - the user needs to provide a file via mass storage or similar interfaces

giga.menu.split.100_0.upload.address_m4=

giga.menu.target_core.cm4.upload.address={upload.address_m4}

giga.menu.target_core.cm4.menu.split.50_50.upload.maximum_size=1048576

giga.menu.target_core.cm4.menu.split.75_25.upload.maximum_size=524288

giga.menu.target_core.cm4.menu.split.100_0.upload.maximum_size=524288

giga.menu.target_core.cm4.upload.maximum_data_size=294248

giga.debug.tool=gdb

giga.bootloader.tool=openocd

giga.bootloader.tool.default=openocd

giga.bootloader.config=-f target/stm32h7x_dual_bank.cfg

giga.bootloader.programmer=-f interface/stlink.cfg

giga.bootloader.extra_action.preflash=stm32h7x option_write 0 0x01c 0xb86aaf0

giga.bootloader.file=GIGA/bootloader.hex

giga.debug.server.openocd.scripts.0=interface/{programmer.protocol}.cfg

giga.debug.server.openocd.scripts.1={programmer.transport_script}

giga.debug.server.openocd.scripts.2=target/stm32h7x_dual_bank.cfg

giga.debug.cortex-debug.custom.request=attach

giga.menu.target_core.cm7.debug.svd_file={runtime.platform.path}/svd/STM32H747_CM7.svd

giga.menu.target_core.cm4.debug.svd_file={runtime.platform.path}/svd/STM32H747_CM4.svd

##############################################################

stella.name=Arduino Stella

stella.build.core=arduino

stella.build.crossprefix=arm-none-eabi-

stella.build.compiler_path={runtime.tools.arm-none-eabi-gcc-7-2017q4.path}/bin/

stella.build.variant=STELLA

stella.build.mcu=cortex-m4

stella.build.extra_flags=

stella.build.architecture=cortex-m4

stella.build.fpu=-mfpu=fpv4-sp-d16

stella.build.float-abi=-mfloat-abi=softfp

stella.build.board=STELLA

stella.build.ldscript=linker_script.ld

stella.compiler.mbed.arch.define=-DARDUINO_ARCH_NRF52840

stella.compiler.mbed.defines={build.variant.path}/defines.txt

stella.compiler.mbed.ldflags={build.variant.path}/ldflags.txt

stella.compiler.mbed.cflags={build.variant.path}/cflags.txt

stella.compiler.mbed.cxxflags={build.variant.path}/cxxflags.txt

stella.compiler.mbed.includes={build.variant.path}/includes.txt

stella.compiler.mbed.extra_ldflags=-lstdc++ -lsupc++ -lm -lc -lgcc -lnosys

stella.compiler.mbed="{build.variant.path}/libs/libmbed.a" "{build.variant.path}/libs/libcc_310_core.a" "{build.variant.path}/libs/libcc_310_ext.a" "{build.variant.path}/libs/libcc_310_trng.a"

stella.vid.0=0x2341

stella.pid.0=0x005a

stella.vid.1=0x2341

stella.pid.1=0x0076

stella.upload_port.0.vid=0x2341

stella.upload_port.0.pid=0x005a

stella.upload_port.1.vid=0x2341

stella.upload_port.1.pid=0x0076

stella.upload.tool=bossac

stella.upload.tool.default=bossac

stella.upload.protocol=

stella.upload.transport=

stella.upload.use_1200bps_touch=true

stella.upload.wait_for_upload_port=true

stella.upload.native_usb=true

stella.upload.maximum_size=983040

stella.upload.maximum_data_size=262144

stella.bootloader.tool=openocd

stella.bootloader.tool.default=openocd

stella.bootloader.extra_action.preflash=echo INFO:removed_mass-erase

stella.bootloader.config=-f target/nrf52.cfg

stella.bootloader.programmer=-f interface/cmsis-dap.cfg

stella.bootloader.file=nano33ble/bootloader.hex

stella.debug.server.openocd.scripts.0=interface/{programmer.protocol}.cfg

stella.debug.server.openocd.scripts.1={programmer.transport_script}

stella.debug.server.openocd.scripts.2=target/nrf52.cfg

stella.debug.svd_file={runtime.platform.path}/svd/nrf52840.svd