#

# nmake Makefile for SQLite

#

###############################################################################

############################## START OF OPTIONS ###############################

###############################################################################

# The toplevel directory of the source tree. This is the directory

# that contains this "Makefile.msc".

#

TOP = .

# <<mark>>

# Set this non-0 to create and use the SQLite amalgamation file.

#

!IFNDEF USE_AMALGAMATION

USE_AMALGAMATION = 1

!ENDIF

# <</mark>>

# Set this non-0 to enable full warnings (-W4, etc) when compiling.

#

!IFNDEF USE_FULLWARN

USE_FULLWARN = 1

!ENDIF

# Set this non-0 to enable treating warnings as errors (-WX, etc) when

# compiling.

#

!IFNDEF USE_FATAL_WARN

USE_FATAL_WARN = 0

!ENDIF

# Set this non-0 to enable full runtime error checks (-RTC1, etc). This

# has no effect if (any) optimizations are enabled.

#

!IFNDEF USE_RUNTIME_CHECKS

USE_RUNTIME_CHECKS = 0

!ENDIF

# Set this non-0 to create a SQLite amalgamation file that excludes the

# various built-in extensions.

#

!IFNDEF MINIMAL_AMALGAMATION

MINIMAL_AMALGAMATION = 0

!ENDIF

# Set this non-0 to use "stdcall" calling convention for the core library

# and shell executable.

#

!IFNDEF USE_STDCALL

USE_STDCALL = 0

!ENDIF

# Set this non-0 to have the shell executable link against the core dynamic

# link library.

#

!IFNDEF DYNAMIC_SHELL

DYNAMIC_SHELL = 0

!ENDIF

# Set this non-0 to enable extra code that attempts to detect misuse of the

# SQLite API.

#

!IFNDEF API_ARMOR

API_ARMOR = 0

!ENDIF

# If necessary, create a list of harmless compiler warnings to disable when

# compiling the various tools. For the SQLite source code itself, warnings,

# if any, will be disabled from within it.

#

!IFNDEF NO_WARN

!IF $(USE_FULLWARN)!=0

NO_WARN = -wd4054 -wd4055 -wd4100 -wd4127 -wd4130 -wd4152 -wd4189 -wd4206

NO_WARN = $(NO_WARN) -wd4210 -wd4232 -wd4305 -wd4306 -wd4702 -wd4706

!ENDIF

!ENDIF

# Set this non-0 to use the library paths and other options necessary for

# Windows Phone 8.1.

#

!IFNDEF USE_WP81_OPTS

USE_WP81_OPTS = 0

!ENDIF

# Set this non-0 to split the SQLite amalgamation file into chunks to

# be used for debugging with Visual Studio.

#

!IFNDEF SPLIT_AMALGAMATION

SPLIT_AMALGAMATION = 0

!ENDIF

# <<mark>>

# Set this non-0 to have this makefile assume the Tcl shell executable

# (tclsh*.exe) is available in the PATH. By default, this is disabled

# for compatibility with older build environments. This setting only

# applies if TCLSH_CMD is not set manually.

#

!IFNDEF USE_TCLSH_IN_PATH

USE_TCLSH_IN_PATH = 0

!ENDIF

# Set this non-0 to use zlib, possibly compiling it from source code.

#

!IFNDEF USE_ZLIB

USE_ZLIB = 0

!ENDIF

# Set this non-0 to build zlib from source code. This is enabled by

# default and in that case it will be assumed that the ZLIBDIR macro

# points to the top-level source code directory for zlib.

#

!IFNDEF BUILD_ZLIB

BUILD_ZLIB = 1

!ENDIF

# Set this non-0 to use the International Components for Unicode (ICU).

#

!IFNDEF USE_ICU

USE_ICU = 0

!ENDIF

# <</mark>>

# Set this non-0 to dynamically link to the MSVC runtime library.

#

!IFNDEF USE_CRT_DLL

USE_CRT_DLL = 0

!ENDIF

# Set this non-0 to link to the RPCRT4 library.

#

!IFNDEF USE_RPCRT4_LIB

USE_RPCRT4_LIB = 0

!ENDIF

# Set this non-0 to generate assembly code listings for the source code

# files.

#

!IFNDEF USE_LISTINGS

USE_LISTINGS = 0

!ENDIF

# Set this non-0 to attempt setting the native compiler automatically

# for cross-compiling the command line tools needed during the compilation

# process.

#

!IFNDEF XCOMPILE

XCOMPILE = 0

!ENDIF

# Set this non-0 to use the native libraries paths for cross-compiling

# the command line tools needed during the compilation process.

#

!IFNDEF USE_NATIVE_LIBPATHS

USE_NATIVE_LIBPATHS = 0

!ENDIF

# Set this 0 to skip the compiling and embedding of version resources.

#

!IFNDEF USE_RC

USE_RC = 1

!ENDIF

# Set this non-0 to compile binaries suitable for the WinRT environment.

# This setting does not apply to any binaries that require Tcl to operate

# properly (i.e. the text fixture, etc).

#

!IFNDEF FOR_WINRT

FOR_WINRT = 0

!ENDIF

# Set this non-0 to compile binaries suitable for the UWP environment.

# This setting does not apply to any binaries that require Tcl to operate

# properly (i.e. the text fixture, etc).

#

!IFNDEF FOR_UWP

FOR_UWP = 0

!ENDIF

# Set this non-0 to compile binaries suitable for the Windows 10 platform.

#

!IFNDEF FOR_WIN10

FOR_WIN10 = 0

!ENDIF

# <<mark>>

# Set this non-0 to skip attempting to look for and/or link with the Tcl

# runtime library.

#

!IFNDEF NO_TCL

NO_TCL = 0

!ENDIF

# <</mark>>

# Set this to non-0 to create and use PDBs.

#

!IFNDEF SYMBOLS

SYMBOLS = 1

!ENDIF

# Set this to non-0 to use the SQLite debugging heap subsystem.

#

!IFNDEF MEMDEBUG

MEMDEBUG = 0

!ENDIF

# Set this to non-0 to use the Win32 native heap subsystem.

#

!IFNDEF WIN32HEAP

WIN32HEAP = 0

!ENDIF

# Set this to non-0 to enable OSTRACE() macros, which can be useful when

# debugging.

#

!IFNDEF OSTRACE

OSTRACE = 0

!ENDIF

# Set this to one of the following values to enable various debugging

# features. Each level includes the debugging options from the previous

# levels. Currently, the recognized values for DEBUG are:

#

# 0 == NDEBUG: Disables assert() and other runtime diagnostics.

# 1 == SQLITE_ENABLE_API_ARMOR: extra attempts to detect misuse of the API.

# 2 == Disables NDEBUG and all optimizations and then enables PDBs.

# 3 == SQLITE_DEBUG: Enables various diagnostics messages and code.

# 4 == SQLITE_WIN32_MALLOC_VALIDATE: Validate the Win32 native heap per call.

# 5 == SQLITE_DEBUG_OS_TRACE: Enables output from the OSTRACE() macros.

# 6 == SQLITE_ENABLE_IOTRACE: Enables output from the IOTRACE() macros.

#

!IFNDEF DEBUG

DEBUG = 0

!ENDIF

# Enable use of available compiler optimizations? Normally, this should be

# non-zero. Setting this to zero, thus disabling all compiler optimizations,

# can be useful for testing.

#

!IFNDEF OPTIMIZATIONS

OPTIMIZATIONS = 2

!ENDIF

# Set this to non-0 to enable support for the session extension.

#

!IFNDEF SESSION

SESSION = 0

!ENDIF

# Set the source code file to be used by executables and libraries when

# they need the amalgamation.

#

!IFNDEF SQLITE3C

!IF $(SPLIT_AMALGAMATION)!=0

SQLITE3C = sqlite3-all.c

!ELSE

SQLITE3C = sqlite3.c

!ENDIF

!ENDIF

# Set the include code file to be used by executables and libraries when

# they need SQLite.

#

!IFNDEF SQLITE3H

SQLITE3H = sqlite3.h

!ENDIF

# This is the name to use for the SQLite dynamic link library (DLL).

#

!IFNDEF SQLITE3DLL

!IF $(FOR_WIN10)!=0

SQLITE3DLL = winsqlite3.dll

!ELSE

SQLITE3DLL = sqlite3.dll

!ENDIF

!ENDIF

# This is the name to use for the SQLite import library (LIB).

#

!IFNDEF SQLITE3LIB

!IF $(FOR_WIN10)!=0

SQLITE3LIB = winsqlite3.lib

!ELSE

SQLITE3LIB = sqlite3.lib

!ENDIF

!ENDIF

# This is the name to use for the SQLite shell executable (EXE).

#

!IFNDEF SQLITE3EXE

!IF $(FOR_WIN10)!=0

SQLITE3EXE = winsqlite3shell.exe

!ELSE

SQLITE3EXE = sqlite3.exe

!ENDIF

!ENDIF

# This is the argument used to set the program database (PDB) file for the

# SQLite shell executable (EXE).

#

!IFNDEF SQLITE3EXEPDB

!IF $(FOR_WIN10)!=0

SQLITE3EXEPDB =

!ELSE

SQLITE3EXEPDB = /pdb:sqlite3sh.pdb

!ENDIF

!ENDIF

# <<mark>>

# These are the names of the customized Tcl header files used by various parts

# of this makefile when the stdcall calling convention is in use. It is not

# used for any other purpose.

#

!IFNDEF SQLITETCLH

SQLITETCLH = sqlite_tcl.h

!ENDIF

!IFNDEF SQLITETCLDECLSH

SQLITETCLDECLSH = sqlite_tclDecls.h

!ENDIF

# These are the additional targets that the targets that integrate with the

# Tcl library should depend on when compiling, etc.

#

!IFNDEF SQLITE_TCL_DEP

!IF $(USE_STDCALL)!=0 || $(FOR_WIN10)!=0

SQLITE_TCL_DEP = $(SQLITETCLDECLSH) $(SQLITETCLH)

!ELSE

SQLITE_TCL_DEP =

!ENDIF

!ENDIF

# <</mark>>

# These are the "standard" SQLite compilation options used when compiling for

# the Windows platform.

#

!IFNDEF OPT_FEATURE_FLAGS

!IF $(MINIMAL_AMALGAMATION)==0

OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_FTS3=1

OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_RTREE=1

OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_GEOPOLY=1

OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_JSON1=1

OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_STMTVTAB=1

OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_DBPAGE_VTAB=1

OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_DBSTAT_VTAB=1

OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_INTROSPECTION_PRAGMAS=1

!ENDIF

OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_COLUMN_METADATA=1

!ENDIF

# Should the session extension be enabled? If so, add compilation options

# to enable it.

#

!IF $(SESSION)!=0

OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_SESSION=1

OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_PREUPDATE_HOOK=1

!ENDIF

# These are the "extended" SQLite compilation options used when compiling for

# the Windows 10 platform.

#

!IFNDEF EXT_FEATURE_FLAGS

!IF $(FOR_WIN10)!=0

EXT_FEATURE_FLAGS = $(EXT_FEATURE_FLAGS) -DSQLITE_ENABLE_FTS4=1

EXT_FEATURE_FLAGS = $(EXT_FEATURE_FLAGS) -DSQLITE_SYSTEM_MALLOC=1

EXT_FEATURE_FLAGS = $(EXT_FEATURE_FLAGS) -DSQLITE_OMIT_LOCALTIME=1

!ELSE

EXT_FEATURE_FLAGS =

!ENDIF

!ENDIF

###############################################################################

############################### END OF OPTIONS ################################

###############################################################################

# When compiling for the Windows 10 platform, the PLATFORM macro must be set

# to an appropriate value (e.g. x86, x64, arm, arm64, etc).

#

!IF $(FOR_WIN10)!=0

!IFNDEF PLATFORM

!ERROR Using the FOR_WIN10 option requires a value for PLATFORM.

!ENDIF

!ENDIF

# This assumes that MSVC is always installed in 32-bit Program Files directory

# and sets the variable for use in locating other 32-bit installs accordingly.

#

PROGRAMFILES_X86 = $(VCINSTALLDIR)\..\..

PROGRAMFILES_X86 = $(PROGRAMFILES_X86:\\=\)

# Check for the predefined command macro CC. This should point to the compiler

# binary for the target platform. If it is not defined, simply define it to

# the legacy default value 'cl.exe'.

#

!IFNDEF CC

CC = cl.exe

!ENDIF

# Check for the predefined command macro CSC. This should point to a working

# C Sharp compiler binary. If it is not defined, simply define it to the

# legacy default value 'csc.exe'.

#

!IFNDEF CSC

CSC = csc.exe

!ENDIF

# Check for the command macro LD. This should point to the linker binary for

# the target platform. If it is not defined, simply define it to the legacy

# default value 'link.exe'.

#

!IFNDEF LD

LD = link.exe

!ENDIF

# Check for the predefined command macro RC. This should point to the resource

# compiler binary for the target platform. If it is not defined, simply define

# it to the legacy default value 'rc.exe'.

#

!IFNDEF RC

RC = rc.exe

!ENDIF

# Check for the MSVC runtime library path macro. Otherwise, this value will

# default to the 'lib' directory underneath the MSVC installation directory.

#

!IFNDEF CRTLIBPATH

CRTLIBPATH = $(VCINSTALLDIR)\lib

!ENDIF

CRTLIBPATH = $(CRTLIBPATH:\\=\)

# Check for the command macro NCC. This should point to the compiler binary

# for the platform the compilation process is taking place on. If it is not

# defined, simply define it to have the same value as the CC macro. When

# cross-compiling, it is suggested that this macro be modified via the command

# line (since nmake itself does not provide a built-in method to guess it).

# For example, to use the x86 compiler when cross-compiling for x64, a command

# line similar to the following could be used (all on one line):

#

# nmake /f Makefile.msc sqlite3.dll

# XCOMPILE=1 USE_NATIVE_LIBPATHS=1

#

# Alternatively, the full path and file name to the compiler binary for the

# platform the compilation process is taking place may be specified (all on

# one line):

#

# nmake /f Makefile.msc sqlite3.dll

# "NCC=""%VCINSTALLDIR%\bin\cl.exe"""

# USE_NATIVE_LIBPATHS=1

#

!IFDEF NCC

NCC = $(NCC:\\=\)

!ELSEIF $(XCOMPILE)!=0

NCC = "$(VCINSTALLDIR)\bin\$(CC)"

NCC = $(NCC:\\=\)

!ELSE

NCC = $(CC)

!ENDIF

# Check for the MSVC native runtime library path macro. Otherwise,

# this value will default to the 'lib' directory underneath the MSVC

# installation directory.

#

!IFNDEF NCRTLIBPATH

NCRTLIBPATH = $(VCINSTALLDIR)\lib

!ENDIF

NCRTLIBPATH = $(NCRTLIBPATH:\\=\)

# Check for the Platform SDK library path macro. Otherwise, this

# value will default to the 'lib' directory underneath the Windows

# SDK installation directory (the environment variable used appears

# to be available when using Visual C++ 2008 or later via the

# command line).

#

!IFNDEF NSDKLIBPATH

NSDKLIBPATH = $(WINDOWSSDKDIR)\lib

!ENDIF

NSDKLIBPATH = $(NSDKLIBPATH:\\=\)

# Check for the UCRT library path macro. Otherwise, this value will

# default to the version-specific, platform-specific 'lib' directory

# underneath the Windows SDK installation directory.

#

!IFNDEF UCRTLIBPATH

UCRTLIBPATH = $(WINDOWSSDKDIR)\lib\$(WINDOWSSDKLIBVERSION)\ucrt\$(PLATFORM)

!ENDIF

UCRTLIBPATH = $(UCRTLIBPATH:\\=\)

# C compiler and options for use in building executables that

# will run on the platform that is doing the build.

#

!IF $(USE_FULLWARN)!=0

BCC = $(NCC) -nologo -W4 $(CCOPTS) $(BCCOPTS)

!ELSE

BCC = $(NCC) -nologo -W3 $(CCOPTS) $(BCCOPTS)

!ENDIF

# Check if assembly code listings should be generated for the source

# code files to be compiled.

#

!IF $(USE_LISTINGS)!=0

BCC = $(BCC) -FAcs

!ENDIF

# Check if the native library paths should be used when compiling

# the command line tools used during the compilation process. If

# so, set the necessary macro now.

#

!IF $(USE_NATIVE_LIBPATHS)!=0

NLTLIBPATHS = "/LIBPATH:$(NCRTLIBPATH)" "/LIBPATH:$(NSDKLIBPATH)"

!IFDEF NUCRTLIBPATH

NUCRTLIBPATH = $(NUCRTLIBPATH:\\=\)

NLTLIBPATHS = $(NLTLIBPATHS) "/LIBPATH:$(NUCRTLIBPATH)"

!ENDIF

!ENDIF

# C compiler and options for use in building executables that

# will run on the target platform. (BCC and TCC are usually the

# same unless your are cross-compiling.)

#

!IF $(USE_FULLWARN)!=0

TCC = $(CC) -nologo -W4 -DINCLUDE_MSVC_H=1 $(CCOPTS) $(TCCOPTS)

!ELSE

TCC = $(CC) -nologo -W3 $(CCOPTS) $(TCCOPTS)

!ENDIF

# Check if warnings should be treated as errors when compiling.

#

!IF $(USE_FATAL_WARN)!=0

TCC = $(TCC) -WX

!ENDIF

TCC = $(TCC) -DSQLITE_OS_WIN=1 -I. -I$(TOP) -I$(TOP)\src -fp:precise

RCC = $(RC) -DSQLITE_OS_WIN=1 -I. -I$(TOP) -I$(TOP)\src $(RCOPTS) $(RCCOPTS)

# Check if we want to use the "stdcall" calling convention when compiling.

# This is not supported by the compilers for non-x86 platforms. It should

# also be noted here that building any target with these "stdcall" options

# will most likely fail if the Tcl library is also required. This is due

# to how the Tcl library functions are declared and exported (i.e. without

# an explicit calling convention, which results in "cdecl").

#

!IF $(USE_STDCALL)!=0 || $(FOR_WIN10)!=0

!IF "$(PLATFORM)"=="x86"

CORE_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall

SHELL_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall

# <<mark>>

TEST_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall -DINCLUDE_SQLITE_TCL_H=1 -DSQLITE_TCLAPI=__cdecl

# <</mark>>

!ELSE

!IFNDEF PLATFORM

CORE_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall

SHELL_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall

# <<mark>>

TEST_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall -DINCLUDE_SQLITE_TCL_H=1 -DSQLITE_TCLAPI=__cdecl

# <</mark>>

!ELSE

CORE_CCONV_OPTS =

SHELL_CCONV_OPTS =

# <<mark>>

TEST_CCONV_OPTS =

# <</mark>>

!ENDIF

!ENDIF

!ELSE

CORE_CCONV_OPTS =

SHELL_CCONV_OPTS =

# <<mark>>

TEST_CCONV_OPTS =

# <</mark>>

!ENDIF

# These are additional compiler options used for the core library.

#

!IFNDEF CORE_COMPILE_OPTS

!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0

CORE_COMPILE_OPTS = $(CORE_CCONV_OPTS) -DSQLITE_API=__declspec(dllexport)

!ELSE

CORE_COMPILE_OPTS = $(CORE_CCONV_OPTS)

!ENDIF

!ENDIF

# These are the additional targets that the core library should depend on

# when linking.

#

!IFNDEF CORE_LINK_DEP

!IF $(DYNAMIC_SHELL)!=0

CORE_LINK_DEP =

!ELSEIF $(FOR_WIN10)==0 || "$(PLATFORM)"=="x86"

CORE_LINK_DEP = sqlite3.def

!ELSE

CORE_LINK_DEP =

!ENDIF

!ENDIF

# These are additional linker options used for the core library.

#

!IFNDEF CORE_LINK_OPTS

!IF $(DYNAMIC_SHELL)!=0

CORE_LINK_OPTS =

!ELSEIF $(FOR_WIN10)==0 || "$(PLATFORM)"=="x86"

CORE_LINK_OPTS = /DEF:sqlite3.def

!ELSE

CORE_LINK_OPTS =

!ENDIF

!ENDIF

# These are additional compiler options used for the shell executable.

#

!IFNDEF SHELL_COMPILE_OPTS

!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0

SHELL_COMPILE_OPTS = $(SHELL_CCONV_OPTS) -DSQLITE_API=__declspec(dllimport)

!ELSE

SHELL_COMPILE_OPTS = $(SHELL_CCONV_OPTS)

!ENDIF

!ENDIF

# This is the source code that the shell executable should be compiled

# with.

#

!IFNDEF SHELL_CORE_SRC

!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0

SHELL_CORE_SRC =

# <<mark>>

!ELSEIF $(USE_AMALGAMATION)==0

SHELL_CORE_SRC =

# <</mark>>

!ELSE

SHELL_CORE_SRC = $(SQLITE3C)

!ENDIF

!ENDIF

# This is the core library that the shell executable should depend on.

#

!IFNDEF SHELL_CORE_DEP

!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0

SHELL_CORE_DEP = $(SQLITE3DLL)

# <<mark>>

!ELSEIF $(USE_AMALGAMATION)==0

SHELL_CORE_DEP = libsqlite3.lib

# <</mark>>

!ELSE

SHELL_CORE_DEP =

!ENDIF

!ENDIF

# <<mark>>

# If zlib support is enabled, add the dependencies for it.

#

!IF $(USE_ZLIB)!=0 && $(BUILD_ZLIB)!=0

SHELL_CORE_DEP = zlib $(SHELL_CORE_DEP)

TESTFIXTURE_DEP = zlib $(TESTFIXTURE_DEP)

!ENDIF

# <</mark>>

# This is the core library that the shell executable should link with.

#

!IFNDEF SHELL_CORE_LIB

!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0

SHELL_CORE_LIB = $(SQLITE3LIB)

# <<mark>>

!ELSEIF $(USE_AMALGAMATION)==0

SHELL_CORE_LIB = libsqlite3.lib

# <</mark>>

!ELSE

SHELL_CORE_LIB =

!ENDIF

!ENDIF

# These are additional linker options used for the shell executable.

#

!IFNDEF SHELL_LINK_OPTS

SHELL_LINK_OPTS = $(SHELL_CORE_LIB)

!ENDIF

# Check if assembly code listings should be generated for the source

# code files to be compiled.

#

!IF $(USE_LISTINGS)!=0

TCC = $(TCC) -FAcs

!ENDIF

# When compiling the library for use in the WinRT environment,

# the following compile-time options must be used as well to

# disable use of Win32 APIs that are not available and to enable

# use of Win32 APIs that are specific to Windows 8 and/or WinRT.

#

!IF $(FOR_WINRT)!=0

TCC = $(TCC) -DSQLITE_OS_WINRT=1

RCC = $(RCC) -DSQLITE_OS_WINRT=1

TCC = $(TCC) -DWINAPI_FAMILY=WINAPI_FAMILY_APP

RCC = $(RCC) -DWINAPI_FAMILY=WINAPI_FAMILY_APP

!ENDIF

# C compiler options for the Windows 10 platform (needs MSVC 2015).

#

!IF $(FOR_WIN10)!=0

TCC = $(TCC) /d2guard4 -D_ARM_WINAPI_PARTITION_DESKTOP_SDK_AVAILABLE

BCC = $(BCC) /d2guard4 -D_ARM_WINAPI_PARTITION_DESKTOP_SDK_AVAILABLE

!ENDIF

# Also, we need to dynamically link to the correct MSVC runtime

# when compiling for WinRT (e.g. debug or release) OR if the

# USE_CRT_DLL option is set to force dynamically linking to the

# MSVC runtime library.

#

!IF $(FOR_WINRT)!=0 || $(USE_CRT_DLL)!=0

!IF $(DEBUG)>1

TCC = $(TCC) -MDd

BCC = $(BCC) -MDd

!ELSE

TCC = $(TCC) -MD

BCC = $(BCC) -MD

!ENDIF

!ELSE

!IF $(DEBUG)>1

TCC = $(TCC) -MTd

BCC = $(BCC) -MTd

!ELSE

TCC = $(TCC) -MT

BCC = $(BCC) -MT

!ENDIF

!ENDIF

# <<mark>>

# The mksqlite3c.tcl and mksqlite3h.tcl scripts will pull in

# any extension header files by default. For non-amalgamation

# builds, we need to make sure the compiler can find these.

#

!IF $(USE_AMALGAMATION)==0

TCC = $(TCC) -I$(TOP)\ext\fts3

RCC = $(RCC) -I$(TOP)\ext\fts3

TCC = $(TCC) -I$(TOP)\ext\rtree

RCC = $(RCC) -I$(TOP)\ext\rtree

TCC = $(TCC) -I$(TOP)\ext\session

RCC = $(RCC) -I$(TOP)\ext\session

!ENDIF

# The mksqlite3c.tcl script accepts some options on the command

# line. When compiling with debugging enabled, some of these

# options are necessary in order to allow debugging symbols to

# work correctly with Visual Studio when using the amalgamation.

#

!IFNDEF MKSQLITE3C_TOOL

!IF $(MINIMAL_AMALGAMATION)!=0

MKSQLITE3C_TOOL = $(TOP)\tool\mksqlite3c-noext.tcl

!ELSE

MKSQLITE3C_TOOL = $(TOP)\tool\mksqlite3c.tcl

!ENDIF

!ENDIF

!IFNDEF MKSQLITE3C_ARGS

!IF $(DEBUG)>1

MKSQLITE3C_ARGS = --linemacros

!ELSE

MKSQLITE3C_ARGS =

!ENDIF

!IF $(USE_STDCALL)!=0 || $(FOR_WIN10)!=0

MKSQLITE3C_ARGS = $(MKSQLITE3C_ARGS) --useapicall

!ENDIF

!ENDIF

# The mksqlite3h.tcl script accepts some options on the command line.

# When compiling with stdcall support, some of these options are

# necessary.

#

!IFNDEF MKSQLITE3H_ARGS

!IF $(USE_STDCALL)!=0 || $(FOR_WIN10)!=0

MKSQLITE3H_ARGS = --useapicall

!ELSE

MKSQLITE3H_ARGS =

!ENDIF

!ENDIF

# <</mark>>

# Define -DNDEBUG to compile without debugging (i.e., for production usage)

# Omitting the define will cause extra debugging code to be inserted and

# includes extra comments when "EXPLAIN stmt" is used.

#

!IF $(DEBUG)==0

TCC = $(TCC) -DNDEBUG

BCC = $(BCC) -DNDEBUG

RCC = $(RCC) -DNDEBUG

!ENDIF

!IF $(DEBUG)>0 || $(API_ARMOR)!=0 || $(FOR_WIN10)!=0

TCC = $(TCC) -DSQLITE_ENABLE_API_ARMOR=1

RCC = $(RCC) -DSQLITE_ENABLE_API_ARMOR=1

!ENDIF

!IF $(DEBUG)>2

TCC = $(TCC) -DSQLITE_DEBUG=1

RCC = $(RCC) -DSQLITE_DEBUG=1

!IF $(DYNAMIC_SHELL)==0

TCC = $(TCC) -DSQLITE_ENABLE_WHERETRACE -DSQLITE_ENABLE_SELECTTRACE

RCC = $(RCC) -DSQLITE_ENABLE_WHERETRACE -DSQLITE_ENABLE_SELECTTRACE

!ENDIF

!ENDIF

!IF $(DEBUG)>4 || $(OSTRACE)!=0

TCC = $(TCC) -DSQLITE_FORCE_OS_TRACE=1 -DSQLITE_DEBUG_OS_TRACE=1

RCC = $(RCC) -DSQLITE_FORCE_OS_TRACE=1 -DSQLITE_DEBUG_OS_TRACE=1

!ENDIF

!IF $(DEBUG)>5

TCC = $(TCC) -DSQLITE_ENABLE_IOTRACE=1

RCC = $(RCC) -DSQLITE_ENABLE_IOTRACE=1

!ENDIF

# Prevent warnings about "insecure" MSVC runtime library functions

# being used.

#

TCC = $(TCC) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_SECURE_NO_WARNINGS

BCC = $(BCC) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_SECURE_NO_WARNINGS

RCC = $(RCC) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_SECURE_NO_WARNINGS

# Prevent warnings about "deprecated" POSIX functions being used.

#

TCC = $(TCC) -D_CRT_NONSTDC_NO_DEPRECATE -D_CRT_NONSTDC_NO_WARNINGS

BCC = $(BCC) -D_CRT_NONSTDC_NO_DEPRECATE -D_CRT_NONSTDC_NO_WARNINGS

RCC = $(RCC) -D_CRT_NONSTDC_NO_DEPRECATE -D_CRT_NONSTDC_NO_WARNINGS

# Use the SQLite debugging heap subsystem?

#

!IF $(MEMDEBUG)!=0

TCC = $(TCC) -DSQLITE_MEMDEBUG=1

RCC = $(RCC) -DSQLITE_MEMDEBUG=1

# Use native Win32 heap subsystem instead of malloc/free?

#

!ELSEIF $(WIN32HEAP)!=0

TCC = $(TCC) -DSQLITE_WIN32_MALLOC=1

RCC = $(RCC) -DSQLITE_WIN32_MALLOC=1

# Validate the heap on every call into the native Win32 heap subsystem?

#

!IF $(DEBUG)>3

TCC = $(TCC) -DSQLITE_WIN32_MALLOC_VALIDATE=1

RCC = $(RCC) -DSQLITE_WIN32_MALLOC_VALIDATE=1

!ENDIF

!ENDIF

# <<mark>>

# The locations of the Tcl header and library files. Also, the library that

# non-stubs enabled programs using Tcl must link against. These variables

# (TCLINCDIR, TCLLIBDIR, and LIBTCL) may be overridden via the environment

# prior to running nmake in order to match the actual installed location and

# version on this machine.

#

!IFNDEF TCLDIR

TCLDIR = $(TOP)\compat\tcl

!ENDIF

!IFNDEF TCLINCDIR

TCLINCDIR = $(TCLDIR)\include

!ENDIF

!IFNDEF TCLLIBDIR

TCLLIBDIR = $(TCLDIR)\lib

!ENDIF

!IFNDEF LIBTCL

LIBTCL = tcl86.lib

!ENDIF

!IFNDEF LIBTCLSTUB

LIBTCLSTUB = tclstub86.lib

!ENDIF

!IFNDEF LIBTCLPATH

LIBTCLPATH = $(TCLDIR)\bin

!ENDIF

# The locations of the zlib header and library files. These variables

# (ZLIBINCDIR, ZLIBLIBDIR, and ZLIBLIB) may be overridden via the environment

# prior to running nmake in order to match the actual installed (or source

# code) location on this machine.

#

!IFNDEF ZLIBDIR

ZLIBDIR = $(TOP)\compat\zlib

!ENDIF

!IFNDEF ZLIBINCDIR

ZLIBINCDIR = $(ZLIBDIR)

!ENDIF

!IFNDEF ZLIBLIBDIR

ZLIBLIBDIR = $(ZLIBDIR)

!ENDIF

!IFNDEF ZLIBLIB

!IF $(DYNAMIC_SHELL)!=0

ZLIBLIB = zdll.lib

!ELSE

ZLIBLIB = zlib.lib

!ENDIF

!ENDIF

# The locations of the ICU header and library files. These variables

# (ICUINCDIR, ICULIBDIR, and LIBICU) may be overridden via the environment

# prior to running nmake in order to match the actual installed location on

# this machine.

#

!IFNDEF ICUDIR

ICUDIR = $(TOP)\compat\icu

!ENDIF

!IFNDEF ICUINCDIR

ICUINCDIR = $(ICUDIR)\include

!ENDIF

!IFNDEF ICULIBDIR

ICULIBDIR = $(ICUDIR)\lib

!ENDIF

!IFNDEF LIBICU

LIBICU = icuuc.lib icuin.lib

!ENDIF

# This is the command to use for tclsh - normally just "tclsh", but we may

# know the specific version we want to use. This variable (TCLSH_CMD) may be

# overridden via the environment prior to running nmake in order to select a

# specific Tcl shell to use.

#

!IFNDEF TCLSH_CMD

!IF $(USE_TCLSH_IN_PATH)!=0 || !EXIST("$(TCLDIR)\bin\tclsh.exe")

TCLSH_CMD = tclsh

!ELSE

TCLSH_CMD = $(TCLDIR)\bin\tclsh.exe

!ENDIF

!ENDIF

# <</mark>>

# Compiler options needed for programs that use the readline() library.

#

!IFNDEF READLINE_FLAGS

READLINE_FLAGS = -DHAVE_READLINE=0

!ENDIF

# The library that programs using readline() must link against.

#

!IFNDEF LIBREADLINE

LIBREADLINE =

!ENDIF

# Should the database engine be compiled threadsafe

#

TCC = $(TCC) -DSQLITE_THREADSAFE=1

RCC = $(RCC) -DSQLITE_THREADSAFE=1

# Do threads override each others locks by default (1), or do we test (-1)

#

TCC = $(TCC) -DSQLITE_THREAD_OVERRIDE_LOCK=-1

RCC = $(RCC) -DSQLITE_THREAD_OVERRIDE_LOCK=-1

# Any target libraries which libsqlite must be linked against

#

!IFNDEF TLIBS

TLIBS =

!ENDIF

# Flags controlling use of the in memory btree implementation

#

# SQLITE_TEMP_STORE is 0 to force temporary tables to be in a file, 1 to

# default to file, 2 to default to memory, and 3 to force temporary

# tables to always be in memory.

#

TCC = $(TCC) -DSQLITE_TEMP_STORE=1

RCC = $(RCC) -DSQLITE_TEMP_STORE=1

# Enable/disable loadable extensions, and other optional features

# based on configuration. (-DSQLITE_OMIT*, -DSQLITE_ENABLE*).

# The same set of OMIT and ENABLE flags should be passed to the

# LEMON parser generator and the mkkeywordhash tool as well.

# These are the required SQLite compilation options used when compiling for

# the Windows platform.

#

REQ_FEATURE_FLAGS = $(REQ_FEATURE_FLAGS) -DSQLITE_MAX_TRIGGER_DEPTH=100

# If we are linking to the RPCRT4 library, enable features that need it.

#

!IF $(USE_RPCRT4_LIB)!=0

REQ_FEATURE_FLAGS = $(REQ_FEATURE_FLAGS) -DSQLITE_WIN32_USE_UUID=1

!ENDIF

# Add the required and optional SQLite compilation options into the command

# lines used to invoke the MSVC code and resource compilers.

#

TCC = $(TCC) $(REQ_FEATURE_FLAGS) $(OPT_FEATURE_FLAGS) $(EXT_FEATURE_FLAGS)

RCC = $(RCC) $(REQ_FEATURE_FLAGS) $(OPT_FEATURE_FLAGS) $(EXT_FEATURE_FLAGS)

# Add in any optional parameters specified on the commane line, e.g.

# nmake /f Makefile.msc all "OPTS=-DSQLITE_ENABLE_FOO=1 -DSQLITE_OMIT_FOO=1"

#