Submitting Patches

==================

== Guidelines

Here are some guidelines for contributing back to this

project. There is also a link:MyFirstContribution.html[step-by-step tutorial]

available which covers many of these same guidelines.

[[patch-flow]]

=== A typical life cycle of a patch series

To help us understand the reason behind various guidelines given later

in the document, first let's understand how the life cycle of a

typical patch series for this project goes.

. You come up with an itch. You code it up. You do not need any

pre-authorization from the project to do so.

+

Your patches will be reviewed by other contributors on the mailing

list, and the reviews will be done to assess the merit of various

things, like the general idea behind your patch (including "is it

solving a problem worth solving in the first place?"), the reason

behind the design of the solution, and the actual implementation.

The guidelines given here are there to help your patches by making

them easier to understand by the reviewers.

. You send the patches to the list and cc people who may need to know

about the change. Your goal is *not* necessarily to convince others

that what you are building is good. Your goal is to get help in

coming up with a solution for the "itch" that is better than what

you can build alone.

+

The people who may need to know are the ones who worked on the code

you are touching. These people happen to be the ones who are

most likely to be knowledgeable enough to help you, but

they have no obligation to help you (i.e. you ask them for help,

you don't demand). +git log -p {litdd} _$area_you_are_modifying_+ would

help you find out who they are.

. You get comments and suggestions for improvements. You may even get

them in an "on top of your change" patch form. You are expected to

respond to them with "Reply-All" on the mailing list, while taking

them into account while preparing an updated set of patches.

. Polish, refine, and re-send your patches to the list and to the people

who spent their time to improve your patch. Go back to step (2).

. While the above iterations improve your patches, the maintainer may

pick the patches up from the list and queue them to the `seen`

branch, in order to make it easier for people to play with it

without having to pick up and apply the patches to their trees

themselves. Being in `seen` has no other meaning. Specifically, it

does not mean the patch was "accepted" in any way.

. When the discussion reaches a consensus that the latest iteration of

the patches are in good enough shape, the maintainer includes the

topic in the "What's cooking" report that are sent out a few times a

week to the mailing list, marked as "Will merge to 'next'." This

decision is primarily made by the maintainer with help from those

who participated in the review discussion.

. After the patches are merged to the 'next' branch, the discussion

can still continue to further improve them by adding more patches on

top, but by the time a topic gets merged to 'next', it is expected

that everybody agrees that the scope and the basic direction of the

topic are appropriate, so such an incremental updates are limited to

small corrections and polishing. After a topic cooks for some time

(like 7 calendar days) in 'next' without needing further tweaks on

top, it gets merged to the 'master' branch and wait to become part

of the next major release.

In the following sections, many techniques and conventions are listed

to help your patches get reviewed effectively in such a life cycle.

[[choose-starting-point]]

=== Choose a starting point.

As a preliminary step, you must first choose a starting point for your

work. Typically this means choosing a branch, although technically

speaking it is actually a particular commit (typically the HEAD, or tip,

of the branch).

There are several important branches to be aware of. Namely, there are

four integration branches as discussed in linkgit:gitworkflows[7]:

* maint

* master

* next

* seen

The branches lower on the list are typically descendants of the ones

that come before it. For example, `maint` is an "older" branch than

`master` because `master` usually has patches (commits) on top of

`maint`.

There are also "topic" branches, which contain work from other

contributors. Topic branches are created by the Git maintainer (in

their fork) to organize the current set of incoming contributions on

the mailing list, and are itemized in the regular "What's cooking in

git.git" announcements. To find the tip of a topic branch, run `git log

--first-parent master..seen` and look for the merge commit. The second

parent of this commit is the tip of the topic branch.

There is one guiding principle for choosing the right starting point: in

general, always base your work on the oldest integration branch that

your change is relevant to (see "Merge upwards" in

linkgit:gitworkflows[7]). What this principle means is that for the

vast majority of cases, the starting point for new work should be the

latest HEAD commit of `maint` or `master` based on the following cases:

* If you are fixing bugs in the released version, use `maint` as the

starting point (which may mean you have to fix things without using

new API features on the cutting edge that recently appeared in

`master` but were not available in the released version).

* Otherwise (such as if you are adding new features) use `master`.

NOTE: In exceptional cases, a bug that was introduced in an old

version may have to be fixed for users of releases that are much older

than the recent releases. `git describe --contains X` may describe

`X` as `v2.30.0-rc2-gXXXXXX` for the commit `X` that introduced the

bug, and the bug may be so high-impact that we may need to issue a new

maintenance release for Git 2.30.x series, when "Git 2.41.0" is the

current release. In such a case, you may want to use the tip of the

maintenance branch for the 2.30.x series, which may be available in the

`maint-2.30` branch in https://github.com/gitster/git[the maintainer's

"broken out" repo].

This also means that `next` or `seen` are inappropriate starting points

for your work, if you want your work to have a realistic chance of

graduating to `master`. They are simply not designed to be used as a

base for new work; they are only there to make sure that topics in

flight work well together. This is why both `next` and `seen` are

frequently re-integrated with incoming patches on the mailing list and

force-pushed to replace previous versions of themselves. A topic that is

literally built on top of `next` cannot be merged to `master` without

dragging in all the other topics in `next`, some of which may not be

ready.

For example, if you are making tree-wide changes, while somebody else is

also making their own tree-wide changes, your work may have severe

overlap with the other person's work. This situation may tempt you to

use `next` as your starting point (because it would have the other

person's work included in it), but doing so would mean you'll not only

depend on the other person's work, but all the other random things from

other contributors that are already integrated into `next`. And as soon

as `next` is updated with a new version, all of your work will need to

be rebased anyway in order for them to be cleanly applied by the

maintainer.

Under truly exceptional circumstances where you absolutely must depend

on a select few topic branches that are already in `next` but not in

`master`, you may want to create your own custom base-branch by forking

`master` and merging the required topic branches into it. You could then

work on top of this base-branch. But keep in mind that this base-branch

would only be known privately to you. So when you are ready to send

your patches to the list, be sure to communicate how you created it in

your cover letter. This critical piece of information would allow

others to recreate your base-branch on their end in order for them to

try out your work.

Finally, note that some parts of the system have dedicated maintainers

with their own separate source code repositories (see the section

"Subsystems" below).

[[separate-commits]]

=== Make separate commits for logically separate changes.

Unless your patch is really trivial, you should not be sending

out a patch that was generated between your working tree and

your commit head. Instead, always make a commit with complete

commit message and generate a series of patches from your

repository. It is a good discipline.

Give an explanation for the change(s) that is detailed enough so

that people can judge if it is good thing to do, without reading

the actual patch text to determine how well the code does what

the explanation promises to do.

If your description starts to get too long, that's a sign that you

probably need to split up your commit to finer grained pieces.

That being said, patches which plainly describe the things that

help reviewers check the patch, and future maintainers understand

the code, are the most beautiful patches. Descriptions that summarize

the point in the subject well, and describe the motivation for the

change, the approach taken by the change, and if relevant how this

differs substantially from the prior version, are all good things

to have.

Make sure that you have tests for the bug you are fixing. See

`t/README` for guidance.

[[tests]]

When adding a new feature, make sure that you have new tests to show

the feature triggers the new behavior when it should, and to show the

feature does not trigger when it shouldn't. After any code change,

make sure that the entire test suite passes. When fixing a bug, make

sure you have new tests that break if somebody else breaks what you

fixed by accident to avoid regression. Also, try merging your work to

'next' and 'seen' and make sure the tests still pass; topics by others

that are still in flight may have unexpected interactions with what

you are trying to do in your topic.

Pushing to a fork of https://github.com/git/git will use their CI

integration to test your changes on Linux, Mac and Windows. See the

<<GHCI,GitHub CI>> section for details.

Do not forget to update the documentation to describe the updated

behavior and make sure that the resulting documentation set formats

well (try the Documentation/doc-diff script).

We currently have a liberal mixture of US and UK English norms for

spelling and grammar, which is somewhat unfortunate. A huge patch that

touches the files all over the place only to correct the inconsistency

is not welcome, though. Potential clashes with other changes that can

result from such a patch are not worth it. We prefer to gradually

reconcile the inconsistencies in favor of US English, with small and

easily digestible patches, as a side effect of doing some other real

work in the vicinity (e.g. rewriting a paragraph for clarity, while

turning en_UK spelling to en_US). Obvious typographical fixes are much

more welcomed ("teh -> "the"), preferably submitted as independent

patches separate from other documentation changes.

[[whitespace-check]]

Oh, another thing. We are picky about whitespaces. Make sure your

changes do not trigger errors with the sample pre-commit hook shipped

in `templates/hooks--pre-commit`. To help ensure this does not happen,

run `git diff --check` on your changes before you commit.

[[describe-changes]]

=== Describe your changes well.

The log message that explains your changes is just as important as the

changes themselves. Your code may be clearly written with in-code

comment to sufficiently explain how it works with the surrounding

code, but those who need to fix or enhance your code in the future

will need to know _why_ your code does what it does, for a few

reasons:

. Your code may be doing something differently from what you wanted it

to do. Writing down what you actually wanted to achieve will help

them fix your code and make it do what it should have been doing

(also, you often discover your own bugs yourself, while writing the

log message to summarize the thought behind it).

. Your code may be doing things that were only necessary for your

immediate needs (e.g. "do X to directories" without implementing or

even designing what is to be done on files). Writing down why you

excluded what the code does not do will help guide future developers.

Writing down "we do X to directories, because directories have

characteristic Y" would help them infer "oh, files also have the same

characteristic Y, so perhaps doing X to them would also make sense?".

Saying "we don't do the same X to files, because ..." will help them

decide if the reasoning is sound (in which case they do not waste

time extending your code to cover files), or reason differently (in

which case, they can explain why they extend your code to cover

files, too).

The goal of your log message is to convey the _why_ behind your change

to help future developers. The reviewers will also make sure that

your proposed log message will serve this purpose well.

The first line of the commit message should be a short description (50

characters is the soft limit, see DISCUSSION in linkgit:git-commit[1]),

and should skip the full stop. It is also conventional in most cases to

prefix the first line with "area: " where the area is a filename or

identifier for the general area of the code being modified, e.g.

* doc: clarify distinction between sign-off and pgp-signing

* githooks.txt: improve the intro section

If in doubt which identifier to use, run `git log --no-merges` on the

files you are modifying to see the current conventions.

[[summary-section]]

The title sentence after the "area:" prefix omits the full stop at the

end, and its first word is not capitalized (the omission

of capitalization applies only to the word after the "area:"

prefix of the title) unless there is a reason to

capitalize it other than because it is the first word in the sentence.

E.g. "doc: clarify...", not "doc: Clarify...", or "githooks.txt:

improve...", not "githooks.txt: Improve...". But "refs: HEAD is also

treated as a ref" is correct, as we spell `HEAD` in all caps even when

it appears in the middle of a sentence.

[[meaningful-message]]

The body should provide a meaningful commit message, which:

. explains the problem the change tries to solve, i.e. what is wrong

with the current code without the change.

. justifies the way the change solves the problem, i.e. why the

result with the change is better.

. alternate solutions considered but discarded, if any.

[[present-tense]]

The problem statement that describes the status quo is written in the

present tense. Write "The code does X when it is given input Y",

instead of "The code used to do Y when given input X". You do not

have to say "Currently"---the status quo in the problem statement is

about the code _without_ your change, by project convention.

[[imperative-mood]]

Describe your changes in imperative mood, e.g. "make xyzzy do frotz"

instead of "[This patch] makes xyzzy do frotz" or "[I] changed xyzzy

to do frotz", as if you are giving orders to the codebase to change

its behavior. Try to make sure your explanation can be understood

without external resources. Instead of giving a URL to a mailing list

archive, summarize the relevant points of the discussion.

[[commit-reference]]

There are a few reasons why you may want to refer to another commit in

the "more stable" part of the history (i.e. on branches like `maint`,

`master`, and `next`):

. A commit that introduced the root cause of a bug you are fixing.

. A commit that introduced a feature that you are enhancing.

. A commit that conflicts with your work when you made a trial merge

of your work into `next` and `seen` for testing.

When you reference a commit on a more stable branch (like `master`,

`maint` and `next`), use the format "abbreviated hash (subject,

date)", like this:

....

Commit f86a374 (pack-bitmap.c: fix a memleak, 2015-03-30)

noticed that ...

....

The "Copy commit reference" command of gitk can be used to obtain this

format (with the subject enclosed in a pair of double-quotes), or this

invocation of `git show`:

....

git show -s --pretty=reference <commit>

....

or, on an older version of Git without support for --pretty=reference:

....

git show -s --date=short --pretty='format:%h (%s, %ad)' <commit>

....

[[sign-off]]

=== Certify your work by adding your `Signed-off-by` trailer

To improve tracking of who did what, we ask you to certify that you

wrote the patch or have the right to pass it on under the same license

as ours, by "signing off" your patch. Without sign-off, we cannot

accept your patches.

If (and only if) you certify the below D-C-O:

[[dco]]

.Developer's Certificate of Origin 1.1

____

By making a contribution to this project, I certify that:

a. The contribution was created in whole or in part by me and I

have the right to submit it under the open source license

indicated in the file; or

b. The contribution is based upon previous work that, to the best

of my knowledge, is covered under an appropriate open source

license and I have the right under that license to submit that

work with modifications, whether created in whole or in part

by me, under the same open source license (unless I am

permitted to submit under a different license), as indicated

in the file; or

c. The contribution was provided directly to me by some other

person who certified (a), (b) or (c) and I have not modified

it.

d. I understand and agree that this project and the contribution

are public and that a record of the contribution (including all

personal information I submit with it, including my sign-off) is

maintained indefinitely and may be redistributed consistent with

this project or the open source license(s) involved.

____

you add a "Signed-off-by" trailer to your commit, that looks like

this:

....

Signed-off-by: Random J Developer <random@developer.example.org>

....

This line can be added by Git if you run the git-commit command with

the -s option.

Notice that you can place your own `Signed-off-by` trailer when

forwarding somebody else's patch with the above rules for

D-C-O. Indeed you are encouraged to do so. Do not forget to

place an in-body "From: " line at the beginning to properly attribute

the change to its true author (see (2) above).

This procedure originally came from the Linux kernel project, so our

rule is quite similar to theirs, but what exactly it means to sign-off

your patch differs from project to project, so it may be different

from that of the project you are accustomed to.

[[real-name]]

Please use a known identity in the `Signed-off-by` trailer, since we cannot

accept anonymous contributions. It is common, but not required, to use some form

of your real name. We realize that some contributors are not comfortable doing

so or prefer to contribute under a pseudonym or preferred name and we can accept

your patch either way, as long as the name and email you use are distinctive,

identifying, and not misleading.

The goal of this policy is to allow us to have sufficient information to contact

you if questions arise about your contribution.

[[commit-trailers]]

If you like, you can put extra trailers at the end:

. `Reported-by:` is used to credit someone who found the bug that

the patch attempts to fix.

. `Acked-by:` says that the person who is more familiar with the area

the patch attempts to modify liked the patch.

. `Reviewed-by:`, unlike the other trailers, can only be offered by the

reviewers themselves when they are completely satisfied with the

patch after a detailed analysis.

. `Tested-by:` is used to indicate that the person applied the patch

and found it to have the desired effect.

. `Co-authored-by:` is used to indicate that people exchanged drafts

of a patch before submitting it.

. `Helped-by:` is used to credit someone who suggested ideas for

changes without providing the precise changes in patch form.

. `Mentored-by:` is used to credit someone with helping develop a

patch as part of a mentorship program (e.g., GSoC or Outreachy).

. `Suggested-by:` is used to credit someone with suggesting the idea

for a patch.

While you can also create your own trailer if the situation warrants it, we

encourage you to instead use one of the common trailers in this project

highlighted above.

Only capitalize the very first letter of the trailer, i.e. favor

"Signed-off-by" over "Signed-Off-By" and "Acked-by:" over "Acked-By".

[[ai]]

=== Use of Artificial Intelligence (AI)

The Developer's Certificate of Origin requires contributors to certify

that they know the origin of their contributions to the project and

that they have the right to submit it under the project's license.

It's not yet clear that this can be legally satisfied when submitting

significant amount of content that has been generated by AI tools.

Another issue with AI generated content is that AIs still often

hallucinate or just produce bad code, commit messages, documentation

or output, even when you point out their mistakes.

To avoid these issues, we will reject anything that looks AI

generated, that sounds overly formal or bloated, that looks like AI

slop, that looks good on the surface but makes no sense, or that

senders don’t understand or cannot explain.

We strongly recommend using AI tools carefully and responsibly.

Contributors would often benefit more from AI by using it to guide and

help them step by step towards producing a solution by themselves

rather than by asking for a full solution that they would then mostly

copy-paste. They can also use AI to help with debugging, or with

checking for obvious mistakes, things that can be improved, things

that don’t match our style, guidelines or our feedback, before sending

it to us.

[[git-tools]]

=== Generate your patch using Git tools out of your commits.

Git based diff tools generate unidiff which is the preferred format.

You do not have to be afraid to use `-M` option to `git diff` or

`git format-patch`, if your patch involves file renames. The

receiving end can handle them just fine.

[[review-patch]]

Please make sure your patch does not add commented out debugging code,

or include any extra files which do not relate to what your patch

is trying to achieve. Make sure to review

your patch after generating it, to ensure accuracy. Before

sending out, please make sure it cleanly applies to the starting point you

have chosen in the "Choose a starting point" section.

NOTE: From the perspective of those reviewing your patch, the `master`

branch is the default expected starting point. So if you have chosen a

different starting point, please communicate this choice in your cover

letter.

[[send-patches]]

=== Sending your patches.

==== Choosing your reviewers

:security-ml: footnoteref:[security-ml,The Git Security mailing list: git-security@googlegroups.com]

NOTE: Patches that may be

security relevant should be submitted privately to the Git Security

mailing list{security-ml}, instead of the public mailing list.

:contrib-scripts: footnoteref:[contrib-scripts,Scripts under `contrib/` are +

not part of the core `git` binary and must be called directly. Clone the Git +

codebase and run `perl contrib/contacts/git-contacts`.]

Send your patch with "To:" set to the mailing list, with "cc:" listing

people who are involved in the area you are touching (the `git-contacts`

script in `contrib/contacts/`{contrib-scripts} can help to

identify them), to solicit comments and reviews. Also, when you made

trial merges of your topic to `next` and `seen`, you may have noticed

work by others conflicting with your changes. There is a good possibility

that these people may know the area you are touching well.

If you are using `send-email`, you can feed it the output of `git-contacts` like

this:

....

git send-email --cc-cmd='perl contrib/contacts/git-contacts' feature/*.patch

....

:current-maintainer: footnote:[The current maintainer: gitster@pobox.com]

:git-ml: footnote:[The mailing list: git@vger.kernel.org]

After the list reached a consensus that it is a good idea to apply the

patch, re-send it with "To:" set to the maintainer{current-maintainer}

and "cc:" the list{git-ml} for inclusion. This is especially relevant

when the maintainer did not heavily participate in the discussion and

instead left the review to trusted others.

Do not forget to add trailers such as `Acked-by:`, `Reviewed-by:` and

`Tested-by:` lines as necessary to credit people who helped your

patch, and "cc:" them when sending such a final version for inclusion.

==== `format-patch` and `send-email`

Learn to use `format-patch` and `send-email` if possible. These commands

are optimized for the workflow of sending patches, avoiding many ways

your existing e-mail client (often optimized for "multipart/*" MIME

type e-mails) might render your patches unusable.

NOTE: Here we outline the procedure using `format-patch` and

`send-email`, but you can instead use GitGitGadget to send in your

patches (see link:MyFirstContribution.html[MyFirstContribution]).

People on the Git mailing list need to be able to read and

comment on the changes you are submitting. It is important for

a developer to be able to "quote" your changes, using standard

e-mail tools, so that they may comment on specific portions of

your code. For this reason, each patch should be submitted

"inline" in a separate message.

All subsequent versions of a patch series and other related patches should be

grouped into their own e-mail thread to help readers find all parts of the

series. To that end, send them as replies to either an additional "cover

letter" message (see below), the first patch, or the respective preceding patch.

Here is a link:MyFirstContribution.html#v2-git-send-email[step-by-step guide] on

how to submit updated versions of a patch series.

If your log message (including your name on the

`Signed-off-by` trailer) is not writable in ASCII, make sure that

you send off a message in the correct encoding.

WARNING: Be wary of your MUAs word-wrap

corrupting your patch. Do not cut-n-paste your patch; you can

lose tabs that way if you are not careful.

It is a common convention to prefix your subject line with

[PATCH]. This lets people easily distinguish patches from other

e-mail discussions. Use of markers in addition to PATCH within

the brackets to describe the nature of the patch is also

encouraged. E.g. [RFC PATCH] (where RFC stands for "request for

comments") is often used to indicate a patch needs further

discussion before being accepted, [PATCH v2], [PATCH v3] etc.

are often seen when you are sending an update to what you have

previously sent.

The `git format-patch` command follows the best current practice to

format the body of an e-mail message. At the beginning of the

patch should come your commit message, ending with the

`Signed-off-by` trailers, and a line that consists of three dashes,

followed by the diffstat information and the patch itself. If

you are forwarding a patch from somebody else, optionally, at

the beginning of the e-mail message just before the commit

message starts, you can put a "From: " line to name that person.

To change the default "[PATCH]" in the subject to "[<text>]", use

`git format-patch --subject-prefix=<text>`. As a shortcut, you

can use `--rfc` instead of `--subject-prefix="RFC PATCH"`, or

`-v <n>` instead of `--subject-prefix="PATCH v<n>"`.

You often want to add additional explanation about the patch,

other than the commit message itself. Place such "cover letter"

material between the three-dash line and the diffstat. For

patches requiring multiple iterations of review and discussion,

an explanation of changes between each iteration can be kept in

Git-notes and inserted automatically following the three-dash

line via `git format-patch --notes`.

[[the-topic-summary]]

*This is EXPERIMENTAL*.

When sending a topic, you can optionally propose a topic name and/or a

one-paragraph summary that should appear in the "What's cooking"

report when it is picked up to explain the topic. If you choose to do

so, please write a 2-5 line paragraph that will fit well in our

release notes (see many bulleted entries in the

Documentation/RelNotes/* files for examples), and make it the first

(or second, if including a suggested topic name) paragraph of the

cover letter. If suggesting a topic name, use the format

"XX/your-topic-name", where "XX" is a stand-in for the primary

author's initials, and "your-topic-name" is a brief, dash-delimited

description of what your topic does. For a single-patch series, use

the space between the three-dash line and the diffstat, as described

earlier.

[[multi-series-efforts]]

If your patch series is part of a larger effort spanning multiple

patch series, briefly describe the broader goal, and state where the

current series fits into that goal. If you are suggesting a topic

name as in <<the-topic-summary, section above>>, consider

"XX/the-broader-goal-part-one", "XX/the-broader-goal-part-two", and so

on.

[[attachment]]

Do not attach the patch as a MIME attachment, compressed or not.

Do not let your e-mail client send quoted-printable. Do not let

your e-mail client send format=flowed which would destroy

whitespaces in your patches. Many

popular e-mail applications will not always transmit a MIME

attachment as plain text, making it impossible to comment on

your code. A MIME attachment also takes a bit more time to

process. This does not decrease the likelihood of your

MIME-attached change being accepted, but it makes it more likely

that it will be postponed.

Exception: If your mailer is mangling patches then someone may ask

you to re-send them using MIME, that is OK.

[[pgp-signature]]

Do not PGP sign your patch. Most likely, your maintainer or other people on the

list would not have your PGP key and would not bother obtaining it anyway.

Your patch is not judged by who you are; a good patch from an unknown origin

has a far better chance of being accepted than a patch from a known, respected

origin that is done poorly or does incorrect things.

If you really really really really want to do a PGP signed

patch, format it as "multipart/signed", not a text/plain message

that starts with `-----BEGIN PGP SIGNED MESSAGE-----`. That is

not a text/plain, it's something else.

=== Handling Conflicts and Iterating Patches

When revising changes made to your patches, it's important to

acknowledge the possibility of conflicts with other ongoing topics. To

navigate these potential conflicts effectively, follow the recommended

steps outlined below:

. Build on a suitable base branch, see the <<choose-starting-point, section above>>,

and format-patch the series. If you are doing "rebase -i" in-place to

update from the previous round, this will reuse the previous base so

(2) and (3) may become trivial.

. Find the base of where the last round was queued

+

$ mine='kn/ref-transaction-symref'

$ git checkout "origin/seen^{/^Merge branch '$mine'}...master"

. Apply your format-patch result. There are two cases

.. Things apply cleanly and tests fine. Go to (4).

.. Things apply cleanly but does not build or test fails, or things do

not apply cleanly.

+

In the latter case, you have textual or semantic conflicts coming from

the difference between the old base and the base you used to build in

(1). Identify what caused the breakages (e.g., a topic or two may have

merged since the base used by (2) until the base used by (1)).

+

Check out the latest 'origin/master' (which may be newer than the base

used by (2)), "merge --no-ff" the topics you newly depend on in there,

and use the result of the merge(s) as the base, rebuild the series and

test again. Run format-patch from the last such merges to the tip of

your topic. If you did

+

$ git checkout origin/master

$ git merge --no-ff --into-name kn/ref-transaction-symref fo/obar

$ git merge --no-ff --into-name kn/ref-transaction-symref ba/zqux

... rebuild the topic ...

+

Then you'd just format your topic above these "preparing the ground"

merges, e.g.

+

$ git format-patch "HEAD^{/^Merge branch 'ba/zqux'}"..HEAD

+

Do not forget to write in the cover letter you did this, including the

topics you have in your base on top of 'master'. Then go to (4).

. Make a trial merge of your topic into 'next' and 'seen', e.g.

+

$ git checkout --detach 'origin/seen'

$ git revert -m 1 <the merge of the previous iteration into seen>

$ git merge kn/ref-transaction-symref

+

The "revert" is needed if the previous iteration of your topic is

already in 'seen' (like in this case). You could choose to rebuild

master..origin/seen from scratch while excluding your previous

iteration, which may emulate what happens on the maintainers end more

closely.

+

This trial merge may conflict. It is primarily to see what conflicts

_other_ topics may have with your topic. In other words, you do not

have to depend on it to make your topic work on 'master'. It may

become the job of the other topic owners to resolve conflicts if your

topic goes to 'next' before theirs.

+

Make a note on what conflict you saw in the cover letter. You do not

necessarily have to resolve them, but it would be a good opportunity to

learn what others are doing in related areas.

+

$ git checkout --detach 'origin/next'

$ git merge kn/ref-transaction-symref

+

This is to see what conflicts your topic has with other topics that are

already cooking. This should not conflict if (3)-2 prepared a base on

top of updated master plus dependent topics taken from 'next'. Unless

the context is severe (one way to tell is try the same trial merge with

your old iteration, which may conflict in a similar way), expect that it

will be handled on maintainers end (if it gets unmanageable, I'll ask to

rebase when I receive your patches).

== Subsystems with dedicated maintainers

Some parts of the system have dedicated maintainers with their own

repositories.

- `git-gui/` comes from the git-gui project, maintained by Johannes Sixt:

https://github.com/j6t/git-gui

Contibutions should go via the git mailing list.

- `gitk-git/` comes from the gitk project, maintained by Johannes Sixt:

https://github.com/j6t/gitk

Contibutions should go via the git mailing list.

- `po/` comes from the localization coordinator, Jiang Xin:

https://github.com/git-l10n/git-po/

Patches to these parts should be based on their trees.

- The "Git documentation translations" project, led by Jean-Noël

Avila, translates our documentation pages. Their work products are

maintained separately from this project, not as part of our tree:

https://github.com/jnavila/git-manpages-l10n/

== GitHub CI[[GHCI]]

With an account at GitHub, you can use GitHub CI to test your changes

on Linux, Mac and Windows. See

https://github.com/git/git/actions/workflows/main.yml for examples of

recent CI runs.

Follow these steps for the initial setup:

. Fork https://github.com/git/git to your GitHub account.

You can find detailed instructions how to fork here:

https://help.github.com/articles/fork-a-repo/

After the initial setup, CI will run whenever you push new changes

to your fork of Git on GitHub. You can monitor the test state of all your

branches here: `https://github.com/<Your GitHub handle>/git/actions/workflows/main.yml`

If a branch does not pass all test cases then it will be marked with a

red +x+, instead of a green check. In that case, you can click on the

failing job and navigate to "ci/run-build-and-tests.sh" and/or

"ci/print-test-failures.sh". You can also download "Artifacts" which

are zip archives containing tarred (or zipped) archives with test data

relevant for debugging.

Then fix the problem and push your fix to your GitHub fork. This will

trigger a new CI build to ensure all tests pass.

[[mua]]

== MUA specific hints

Some of the patches I receive or pick up from the list share common

patterns of breakage. Please make sure your MUA is set up

properly not to corrupt whitespaces.

See the DISCUSSION section of linkgit:git-format-patch[1] for hints on

checking your patch by mailing it to yourself and applying with

linkgit:git-am[1].

While you are at it, check the resulting commit log message from

a trial run of applying the patch. If what is in the resulting

commit is not exactly what you would want to see, it is very

likely that your maintainer would end up hand editing the log

message when he applies your patch. Things like "Hi, this is my

first patch.\n", if you really want to put in the patch e-mail,

should come after the three-dash line that signals the end of the

commit message.

=== Pine

(Johannes Schindelin)

....

I don't know how many people still use pine, but for those poor

souls it may be good to mention that the quell-flowed-text is

needed for recent versions.

... the "no-strip-whitespace-before-send" option, too. AFAIK it

was introduced in 4.60.

....

(Linus Torvalds)

....

And 4.58 needs at least this.

diff-tree 8326dd8350be64ac7fc805f6563a1d61ad10d32c (from e886a61f76edf5410573e92e38ce22974f9c40f1)

Author: Linus Torvalds <torvalds@g5.osdl.org>

Date: Mon Aug 15 17:23:51 2005 -0700

Fix pine whitespace-corruption bug

There's no excuse for unconditionally removing whitespace from

the pico buffers on close.

diff --git a/pico/pico.c b/pico/pico.c

--- a/pico/pico.c

+++ b/pico/pico.c

@@ -219,7 +219,9 @@ PICO *pm;

switch(pico_all_done){ /* prepare for/handle final events */

case COMP_EXIT : /* already confirmed */

packheader();

+#if 0

stripwhitespace();

+#endif

c |= COMP_EXIT;

break;

....

(Daniel Barkalow)

....

> A patch to SubmittingPatches, MUA specific help section for

> users of Pine 4.63 would be very much appreciated.

Ah, it looks like a recent version changed the default behavior to do the

right thing, and inverted the sense of the configuration option. (Either

that or Gentoo did it.) So you need to set the

"no-strip-whitespace-before-send" option, unless the option you have is

"strip-whitespace-before-send", in which case you should avoid checking

it.

....

=== Thunderbird, KMail, GMail

See the MUA-SPECIFIC HINTS section of linkgit:git-format-patch[1].

=== Gnus

"|" in the `*Summary*` buffer can be used to pipe the current

message to an external program, and this is a handy way to drive

`git am`. However, if the message is MIME encoded, what is

piped into the program is the representation you see in your

`*Article*` buffer after unwrapping MIME. This is often not what

you would want for two reasons. It tends to screw up non-ASCII

characters (most notably in people's names), and also

whitespaces (fatal in patches). Running "C-u g" to display the

message in raw form before using "|" to run the pipe can work

this problem around.